80A955102 Front Right Headlight Washer Nozzle for AUDI Q5 2018
Primary OE reference: 80A955102
Cross-reference number 1: 80A 955 102
Cross-reference number 2: 80A955102
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI Q5 2018
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q5
Model year: 2018
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-089
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
80A955102 Front Right Headlight Washer Nozzle Product Overview
The component shown under 80A955102 is a front right headlight washer nozzle intended for AUDI Q5 2018. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 80A955102 should be confirmed against AUDI Q5 2018 and the right installation side. The review should retain the removed component for a direct physical comparison, check whether the bumper is standard or sport specification, and check the washer jet position relative to the headlamp lens. Use the removed part and product photographs to match the connector and fluid inlet position where applicable, compare the actuator orientation behind the bumper cover, and compare the washer opening beside the correct headlamp; finally, separate mirrored left and right items during inventory selection and compare every tab, clip seat and locating shoulder.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-089 should be checked separately. For this headlight washer nozzle, check the cap hinge or retaining point, review the clip geometry on the rear face, and compare the cap-to-support engagement method. A direct comparison with the removed part should additionally inspect narrow plastic tips before installation, check whether the visible part requires painting, and review the left-to-right mirrored geometry. Before the item is accepted, compare the support flange width and inspect the actuator barrel for impact damage.
OE Identification and Side Confirmation
80A955102 is the primary OE identity for this right front right headlight washer nozzle, while AD02010-089 is the internal item code. Match both references to the vehicle record, then separate mirrored left and right items during inventory selection. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-089 begins before the bumper area is disturbed: reconfirm the OE number before discarding the packaging and route the washer hose away from sharp edges. During trial fitting, support the bumper cover while accessing the hidden actuator, paint or finish visible covers before final installation when required, and check the headlamp lens receives an even spray. Before returning the vehicle to service, work with the washer system depressurized, confirm that the nozzle extends and retracts freely, and verify that the cap remains attached through a full washer cycle.
Receiving Inspection
When AD02010-089 arrives, receiving staff should check the cap hinge or retaining point for free movement, check molded tabs for whitening, cracks or transport stress, and check the cap hinge or retaining point for free movement. Before workshop release, check molded tabs for whitening, cracks or transport stress, check the cap hinge or retaining point for free movement, check molded tabs for whitening, cracks or transport stress, and check the cap hinge or retaining point for free movement. Complete the inspection by ensuring that staff check molded tabs for whitening, cracks or transport stress, check the cap hinge or retaining point for free movement, and check molded tabs for whitening, cracks or transport stress.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 80A955102 |
| Cross-reference numbers | 80A 955 102 80A955102 |
| Internal item code | AD02010-089 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2018 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q5 2018 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 80A955102, please protect hose spigots and projecting tabs, provide the consignee and freight-forwarder details, and confirm the acceptable delivery window. Packing instructions should plug open fluid connections during packing, confirm the preferred incoterm, and request replacement-part documentation when required. Before dispatch, separate left and right items on the packing list and retain the product label until fitment is confirmed.
Frequently Asked Questions
Why must left and right versions of 80A955102 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item AD02010-089, the approval should check the cap hinge or retaining point. The same item record should also check the joint between the visible cap and hidden support.
Are clips, hoses or fasteners supplied with 80A955102?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed AUDI Q5 2018, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally protect hose spigots and projecting tabs.
Can 80A955102 fit every Q5 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For the right-side order line, confirm that the vehicle is equipped with a factory headlight washer system. The order review should further confirm that the listed model designation matches the vehicle.
What information should accompany a 80A955102 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. The product-specific check for 80A955102 should identify painted and unpainted variants on separate lines. Receiving staff should also send photographs of the removed washer part.
Which vehicle application is listed for 80A955102?
80A955102 is listed for AUDI Q5 2018. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. Before this headlight washer nozzle is accepted, review facelift and pre-facelift washer layouts. Before approval, the buyer or technician should check regional variations in headlamp-cleaning equipment.
