80A807754A Front Right Headlight Washer Nozzle Cover for AUDI Q5 2018
Primary OE reference: 80A807754A
Cross-reference number 1: 80A 807 754A
Cross-reference number 2: 80A807754A
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI Q5 2018
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q5
Model year: 2018
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-087
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
80A807754A Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 80A807754A is a front right headlight washer nozzle cover intended for AUDI Q5 2018. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 80A807754A should be confirmed against AUDI Q5 2018 and the right installation side. The review should match the connector and fluid inlet position where applicable, verify the required left or right installation side, and review painted, primed and unpainted finish requirements. Use the removed part and product photographs to separate mirrored left and right items during inventory selection, confirm whether a cap, nozzle, bracket or complete assembly is required, and compare product photographs with the removed part from several angles; finally, match the mounting pattern around the bumper aperture and confirm that the listed model designation matches the vehicle.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-087 should be checked separately. For this headlight washer nozzle cover, review the sealing area around the hose connection, compare the visible bumper-side contour, and inspect the washer outlet for blockage. A direct comparison with the removed part should additionally check the nozzle outlet orientation, review the bracket stiffness and screw seats, and compare the depth of the actuator body. Before the item is accepted, inspect the molded tabs for cracks or distortion and check the bumper-facing surface for transport marks.
OE Identification and Side Confirmation
80A807754A is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-087 is the internal item code. Match both references to the vehicle record, then check regional variations in headlamp-cleaning equipment. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-087 begins before the bumper area is disturbed: replace distorted clips or damaged seals and support the bumper cover while accessing the hidden actuator. During trial fitting, verify that the cap remains attached through a full washer cycle, tighten bracket hardware only after alignment, and follow the vehicle workshop procedure for bumper removal. Before returning the vehicle to service, keep dirt out of open washer-fluid lines, confirm sufficient clearance behind the bumper, and inspect nearby wiring and sensors before refitting trim.
Receiving Inspection
When AD02010-087 arrives, receiving staff should compare the supplied side with the vehicle repair order, check the spring-return area where the component includes an actuator, and photograph the received item if the vehicle fitment is still pending. Before workshop release, review the production finish against the approved sample, match the item label to the purchase order and OE reference, confirm that loose accessories are identified on the packing list, and separate mirrored components immediately after carton opening. Complete the inspection by ensuring that staff confirm the internal item code before mixed stock is shelved, check molded tabs for whitening, cracks or transport stress, and check painted or primed surfaces under neutral lighting.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 80A807754A |
| Cross-reference numbers | 80A 807 754A 80A807754A |
| Internal item code | AD02010-087 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2018 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q5 2018 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 80A807754A, please confirm pallet requirements for larger quantities, confirm sample approval before mass shipment, and identify painted and unpainted variants on separate lines. Packing instructions should include the full OE reference on the purchase order, plug open fluid connections during packing, and state the target vehicle application. Before dispatch, retain the product label until fitment is confirmed and state the requested delivery schedule.
Frequently Asked Questions
Is a sample order available for 80A807754A?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For item AD02010-087, the approval should check carton labels at receiving. The same item record should also protect hose spigots and projecting tabs.
Which vehicle application is listed for 80A807754A?
80A807754A is listed for AUDI Q5 2018. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed AUDI Q5 2018, technicians should verify that the OE reference is not for the opposite side. A workshop comparison should additionally match the exact model year and bumper revision.
How should 80A807754A be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the right-side order line, compare the actuator orientation behind the bumper cover. The order review should further verify the required left or right installation side.
Can 80A807754A fit every Q5 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. The product-specific check for 80A807754A should review body-style differences within the same model generation. Receiving staff should also use the full OE number, not a partial family reference.
What information should accompany a 80A807754A enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle cover is accepted, confirm the preferred incoterm. Before approval, the buyer or technician should include the full OE reference on the purchase order.
