80A807754 Front Right Headlight Washer Nozzle Cover for AUDI Q5 2018
Primary OE reference: 80A807754
Cross-reference number 1: 80A 807 754
Cross-reference number 2: 80A807754
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI Q5 2018
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q5
Model year: 2018
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-091
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
80A807754 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 80A807754 is a front right headlight washer nozzle cover intended for AUDI Q5 2018. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 80A807754 should be confirmed against AUDI Q5 2018 and the right installation side. The review should compare product photographs with the removed part from several angles, use the full OE number, not a partial family reference, and confirm that the vehicle is equipped with a factory headlight washer system. Use the removed part and product photographs to check whether the bumper is standard or sport specification, confirm the destination-market equipment specification, and check the production date where model-year transitions overlap; finally, compare the actuator orientation behind the bumper cover and review painted, primed and unpainted finish requirements.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-091 should be checked separately. For this headlight washer nozzle cover, compare the distance between mounting points, inspect the actuator barrel for impact damage, and check the complete supplied scope against the photographs. A direct comparison with the removed part should additionally review the clip geometry on the rear face, compare the depth of the actuator body, and inspect the washer outlet for blockage. Before the item is accepted, check the joint between the visible cap and hidden support and review the hose spigot angle on the washer nozzle.
OE Identification and Side Confirmation
80A807754 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-091 is the internal item code. Match both references to the vehicle record, then check the washer jet position relative to the headlamp lens. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-091 begins before the bumper area is disturbed: support the bumper cover while accessing the hidden actuator and use hand pressure rather than levering narrow plastic tabs. During trial fitting, protect the painted bumper surface during removal, replace distorted clips or damaged seals, and reconnect every hose clip before filling the system. Before returning the vehicle to service, work with the washer system depressurized, clean the hose and connector before assembly, and compare the installed height with the opposite side.
Receiving Inspection
When AD02010-091 arrives, receiving staff should protect the visible face again after inspection is complete, check the actuator body for straightness before trial installation, and check painted or primed surfaces under neutral lighting. Before workshop release, match the item label to the purchase order and OE reference, confirm that small seals or clips have not remained in the wrapping, verify the supplied scope before discarding dividers or inner bags, and inspect the visible cover face for scratches or pressure marks. Complete the inspection by ensuring that staff inspect projecting pins before placing the item on a hard bench, compare connector depth and hose angle with the retained original part, and check molded tabs for whitening, cracks or transport stress.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 80A807754 |
| Cross-reference numbers | 80A 807 754 80A807754 |
| Internal item code | AD02010-091 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2018 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q5 2018 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 80A807754, please state the requested delivery schedule, request protective inner wrapping for painted faces, and state the requested delivery schedule. Packing instructions should request protective inner wrapping for painted faces, state the requested delivery schedule, and request protective inner wrapping for painted faces. Before dispatch, state the requested delivery schedule and request protective inner wrapping for painted faces.
Frequently Asked Questions
Which vehicle application is listed for 80A807754?
80A807754 is listed for AUDI Q5 2018. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For item AD02010-091, the approval should verify the required left or right installation side. The same item record should also compare the actuator orientation behind the bumper cover.
What should be inspected when 80A807754 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. On the listed AUDI Q5 2018, technicians should inspect the rear locator shape without forcing any movable section. A workshop comparison should additionally match the item label to the purchase order and OE reference.
How should 80A807754 be packed for export?
The front right headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the right-side order line, confirm the acceptable delivery window. The order review should further use dividers to prevent caps from rubbing each other.
Is 80A807754 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. The product-specific check for 80A807754 should request barcode or private-label details when needed. Receiving staff should also request protective inner wrapping for painted faces.
What information should accompany a 80A807754 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle cover is accepted, provide the complete destination address or port. Before approval, the buyer or technician should state the requested delivery schedule.
