80A807753A Front Left Headlight Washer Nozzle Cover for AUDI Q5 2018
Primary OE reference: 80A807753A
Cross-reference number 1: 80A 807 753A
Cross-reference number 2: 80A807753A
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI Q5 2018
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q5
Model year: 2018
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-086
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
80A807753A Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 80A807753A is a front left headlight washer nozzle cover intended for AUDI Q5 2018. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 80A807753A should be confirmed against AUDI Q5 2018 and the left installation side. The review should compare the actuator orientation behind the bumper cover, review body-style differences within the same model generation, and review facelift and pre-facelift washer layouts. Use the removed part and product photographs to review painted, primed and unpainted finish requirements, check the washer jet position relative to the headlamp lens, and match the mounting pattern around the bumper aperture; finally, verify nearby parking-sensor or trim interfaces and compare the complete OE marking with the removed washer component.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-086 should be checked separately. For this headlight washer nozzle cover, check the nozzle outlet orientation, inspect the actuator barrel for impact damage, and compare the cap-to-support engagement method. A direct comparison with the removed part should additionally review the bracket stiffness and screw seats, check the fluid inlet for storage contamination, and inspect the hose connector for ovality. Before the item is accepted, compare the depth of the actuator body and review any paint-preparation requirement before fitting.
OE Identification and Side Confirmation
80A807753A is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-086 is the internal item code. Match both references to the vehicle record, then verify the required left or right installation side. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-086 begins before the bumper area is disturbed: align the cover flush with the bumper surface and photograph the original routing before disassembly. During trial fitting, keep dirt out of open washer-fluid lines, route the washer hose away from sharp edges, and inspect the bumper opening after the trial fit. Before returning the vehicle to service, confirm sufficient clearance behind the bumper, confirm that the nozzle extends and retracts freely, and confirm that no hose is pinched behind the bumper.
Receiving Inspection
When AD02010-086 arrives, receiving staff should review the production finish against the approved sample, compare the supplied side with the vehicle repair order, and compare left and right orientation before removing protective wrapping. Before workshop release, verify the supplied scope before discarding dividers or inner bags, check the cap hinge or retaining point for free movement, measure the main mounting span when two bumper versions appear similar, and protect the visible face again after inspection is complete. Complete the inspection by ensuring that staff verify the cover contour against the approved product photograph, compare connector depth and hose angle with the retained original part, and verify that protective plugs remain in open fluid connections.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 80A807753A |
| Cross-reference numbers | 80A 807 753A 80A807753A |
| Internal item code | AD02010-086 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2018 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q5 2018 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 80A807753A, please identify project stock and service stock separately, retain the product label until fitment is confirmed, and request moisture protection for sea freight. Packing instructions should separate fragile actuator bodies from heavier metal parts, confirm sample approval before mass shipment, and request replacement-part documentation when required. Before dispatch, protect each nozzle outlet from dust during transit and send photographs of the removed washer part.
Frequently Asked Questions
Does the finish specification matter for 80A807753A?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For item AD02010-086, the approval should compare the cap-to-support engagement method. The same item record should also check each molded locator against the original component.
How should 80A807753A be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. On the listed AUDI Q5 2018, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally check carton labels at receiving.
Can 80A807753A fit every Q5 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For the left-side order line, compare product photographs with the removed part from several angles. The order review should further inspect the bumper cutout shape and surrounding contour.
Is workshop installation recommended for 80A807753A?
Yes. A qualified workshop can access the bumper area on the Q5, transfer hoses or clips safely and test the washer system for correct operation and leaks. The product-specific check for 80A807753A should disconnect the fluid hose without twisting the plastic spigot. Receiving staff should also photograph the original routing before disassembly.
Which vehicle application is listed for 80A807753A?
80A807753A is listed for AUDI Q5 2018. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. Before this headlight washer nozzle cover is accepted, check whether the original cover is supplied separately from its support. Before approval, the buyer or technician should check whether the original cover is supplied separately from its support.
