80A807753 Front Left Headlight Washer Nozzle Cover for AUDI Q5 2018
Primary OE reference: 80A807753
Cross-reference number 1: 80A 807 753
Cross-reference number 2: 80A807753
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI Q5 2018
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q5
Model year: 2018
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-090
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
80A807753 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 80A807753 is a front left headlight washer nozzle cover intended for AUDI Q5 2018. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 80A807753 should be confirmed against AUDI Q5 2018 and the left installation side. The review should compare the nozzle travel direction with the vehicle-side installation, verify nearby parking-sensor or trim interfaces, and match the connector and fluid inlet position where applicable. Use the removed part and product photographs to confirm that the listed model designation matches the vehicle, compare every tab, clip seat and locating shoulder, and check whether the original cover is supplied separately from its support; finally, review body-style differences within the same model generation and compare product photographs with the removed part from several angles.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-090 should be checked separately. For this headlight washer nozzle cover, review the spring-loaded return features where fitted, check whether the visible part requires painting, and inspect the washer outlet for blockage. A direct comparison with the removed part should additionally compare the cap perimeter and corner radii, review any paint-preparation requirement before fitting, and check the cap hinge or retaining point. Before the item is accepted, inspect the base bracket around every locating slot and compare the depth of the actuator body.
OE Identification and Side Confirmation
80A807753 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-090 is the internal item code. Match both references to the vehicle record, then compare the actuator orientation behind the bumper cover. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-090 begins before the bumper area is disturbed: route the washer hose away from sharp edges and tighten bracket hardware only after alignment. During trial fitting, use hand pressure rather than levering narrow plastic tabs, reconfirm the OE number before discarding the packaging, and check the system for leaks after reconnection. Before returning the vehicle to service, keep dirt out of open washer-fluid lines, test for drips after the washer pump stops, and protect the painted bumper surface during removal.
Receiving Inspection
When AD02010-090 arrives, receiving staff should measure the main mounting span when two bumper versions appear similar, check painted or primed surfaces under neutral lighting, and verify the nozzle head returns smoothly without applying excess force. Before workshop release, confirm the bumper-facing edge has not been compressed in transit, match the item label to the purchase order and OE reference, check the cap hinge or retaining point for free movement, and review the hose spigot for impact damage or distortion. Complete the inspection by ensuring that staff confirm that small seals or clips have not remained in the wrapping, inspect the rear locator shape without forcing any movable section, and confirm the internal item code before mixed stock is shelved.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 80A807753 |
| Cross-reference numbers | 80A 807 753 80A807753 |
| Internal item code | AD02010-090 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2018 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q5 2018 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 80A807753, please request barcode or private-label details when needed, verify the packed quantity by OE reference, and plug open fluid connections during packing. Packing instructions should request moisture protection for sea freight, state the required order quantity, and state the target vehicle application. Before dispatch, request a packing-list breakdown by internal item code and confirm whether the visible cover needs a primed or finished surface.
Frequently Asked Questions
Can 80A807753 fit every Q5 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-090, the approval should verify the required left or right installation side. The same item record should also compare the actuator orientation behind the bumper cover.
Is a sample order available for 80A807753?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. On the listed AUDI Q5 2018, technicians should plug open fluid connections during packing. A workshop comparison should additionally retain the product label until fitment is confirmed.
How should 80A807753 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the left-side order line, verify nearby parking-sensor or trim interfaces. The order review should further compare the hose connection or cover hinge with the original part.
How should 80A807753 be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 80A807753 should state the requested delivery schedule. Receiving staff should also protect hose spigots and projecting tabs.
Does the finish specification matter for 80A807753?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle cover is accepted, compare the retracted position with the bumper surface. Before approval, the buyer or technician should check the joint between the visible cap and hidden support.
