7S71-22604-AB Right Rear Exterior Door Handle for 2011 Ford Mondeo
Primary OE reference: 7S71-22604-AB
Cross-reference 1: 7S71-22604-AB
Product type: Right Rear Exterior Door Handle
Applicable vehicle: 2011 FORD Mondeo
Installation position: Right rear exterior door
Brand: FORD
Model: Mondeo
Vehicle year: 2011
Visible identification: Right-rear pull lever with separate end-cap references
Surface appearance: Black exterior lever and cap components
Physical comparison: Match the right-rear pivot, cap opening and operating-arm direction to the vehicle handle base.
Mounting review: Compare the pivot, clips, linkage or electrical connector shown in the saved product images.
Installation preparation: Assemble the cap and lever without forcing the pivot, then test the rear latch from outside and inside.
Order information: Quote 7S71-22604-AB, SKU FD02037-034, right rear exterior door and required quantity.
Wholesale note: State destination, packaging preference and whether matching left/right components are required.
Right Rear Exterior Door Handle Application
OE 7S71-22604-AB covers the right rear exterior door application listed for 2011 FORD Mondeo. It is a dedicated right rear exterior door handle, not a universal replacement chosen by appearance.
Visible Profile and Component Identity
Photographs document right-rear pull lever with separate end-cap references. Also note the black exterior lever and cap components, then verify every concealed fastening feature against the removed component.
Product-Specific Selection Notes
The saved image separates the pull lever from its surrounding caps, making it easier to check each interface. Confirm that the right-rear arm moves in the correct direction and that the cap edges meet the lever without a step.
Surface and Workshop Handling
For 7S71-22604-AB, protect the visible black exterior lever and cap components during bench preparation. Avoid solvents that attack moulded plastic, and do not apply paint or adhesive to the lever pivot, switch membrane or retaining clips.
Latch or Electrical Interface
Before tightening FD02037-034, inspect the latch rod or cable end, pivot pin and return spring for wear. The handle should move the latch through its full travel without side-loading the carrier or scraping the surrounding panel.
Related System Diagnosis
If FD02037-034 feels loose after fitting, inspect the exterior carrier, latch rod engagement and door-skin mounting points before retightening 7S71-22604-AB. Excess force can crack the carrier while leaving the original linkage problem unresolved.
Packaging for Trade Orders
For bulk packing, place FD02037-034 in an individual sleeve with the visible face separated from fasteners and adjacent handles. Mark right rear exterior door on the outer label so mirrored or different-door components remain distinguishable during warehouse picking.
Vehicle and Position Confirmation
Match the right-rear pivot, cap opening and operating-arm direction to the vehicle handle base. For 7S71-22604-AB, confirm 2011 production timing and the right rear exterior door designation; the wrong neighbour part may reverse a pivot, cable seat, lock opening or connector.
Automotive Replacement Part Specifications
| Product type | Right Rear Exterior Door Handle |
|---|---|
| Primary OE reference | 7S71-22604-AB |
| Internal item code | FD02037-034 |
| Vehicle brand | FORD |
| Model | Mondeo |
| Vehicle year | 2011 |
| Applicable vehicle | 2011 FORD Mondeo |
| Installation position | Right rear exterior door |
| Surface appearance | Black exterior lever and cap components |
| Cross-reference numbers | 7S71-22604-AB |
Installation and Functional Check
Assemble the cap and lever without forcing the pivot, then test the rear latch from outside and inside. Once 7S71-22604-AB is seated, cycle the mechanism by hand, observe its return position and make sure nearby trim is not loaded or scratched.
Receiving and Trade Supply
A trade enquiry for FD02037-034 should state 7S71-22604-AB, 2011 FORD Mondeo, right rear exterior door, the required finish and order quantity. Receiving staff can identify this exact line by comparing right-rear pull lever with separate end-cap references with the delivered item.
Frequently Asked Questions
What component is numbered 7S71-22604-AB?
The number refers here to a right rear exterior door handle for the stated FORD Mondeo application.
What needs comparing with the old part?
Match right-rear pull lever with separate end-cap references, followed by every rear attachment and operating connection.
Can paint colour confirm fitment?
No. Surface colour alone does not prove that the carrier, lock feature or linkage is correct.
When is the functional test performed?
Perform a dry test before replacing all trim, then confirm normal return after final tightening.
How is FD02037-034 ordered in quantity?
Specify 7S71-22604-AB, the right rear exterior door, finish, packing preference and shipment destination.
