7NO 807 106B Rear Bumper Light for VOLKSWAGEN Sharan 2013 Right
Primary OE reference: 7NO 807 106B
Product type: Rear Bumper Light
Applicable vehicle: VOLKSWAGEN Sharan 2013
Installation position: Rear bumper / reflector opening
Side / orientation: Right
Brand: VOLKSWAGEN
Model: Sharan
Vehicle year: 2013
Bumper interface: Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Product function: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.
Connector review: Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Fitting note: After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
Selection context: Production date and regional bumper specification should be reviewed when several near-identical versions are available.
Post-fit check: For reflector types, confirm correct orientation; for powered types, test the circuit before closing access panels.
Trade-order details: For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Packing reference: Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
7NO 807 106B Rear Bumper Light Overview
This product is listed for VOLKSWAGEN Sharan 2013 at the right rear-bumper position. Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
While the VOLKSWAGEN bumper opening is accessible, check whether the original component uses a separate retainer or an integral locking tab so the visible gap remains even after every retaining point is engaged.
Vehicle Fitment and Bumper Interface
Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.
Use the removed component as the physical reference for outer shape, housing projection and clip location.
During comparison of the VOLKSWAGEN rear component, verify the fastener direction and the shape of the concealed support frame so the lens and housing are supported without distortion.
For a repeat order of the right version, protect the visible surface until the full perimeter gap has been accepted so a passive reflector is not confused with an illuminated assembly.
Reflector, Lens and Electrical Configuration
Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.
Inspect the moulded tabs from the rear and avoid placing package or hand pressure on the centre of the lens.
On the 2013 Sharan bumper layout, review the reflector texture and lens colour in neutral workshop light to verify that the photographed configuration matches the vehicle in the workshop.
At the workshop selection stage for Sharan, record the approved side and vehicle application for repeat-order identification to avoid contact with wiring, body edges or hot exhaust components.
Installation and Functional Check
After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.
After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.
At the right rear-bumper position, confirm that the cable exit, where fitted, clears the bumper reinforcement to keep the optical face level with the surrounding painted surface.
When reviewing the 2013 vehicle, confirm that any connector seal remains square when the housing is fully seated before any modification is made to the bumper or replacement part.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 7NO 807 106B |
| Cross-reference numbers | 7NO 807 106B |
| Internal item code | VM04004-002 |
| Vehicle brand | VOLKSWAGEN |
| Vehicle model | Sharan |
| Model year | 2013 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Right |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Mixed orders should list left and right quantities separately and identify reflector-only and illuminated versions.
Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
For the VOLKSWAGEN Sharan application, use the opposite-side component only as an alignment reference, not as an interchange part before deciding whether original hardware is suitable for reuse.
For this Sharan body configuration, compare the outer lens edge with the moulded bumper recess because facelift bumpers can retain the same vehicle name with different apertures.
Frequently Asked Questions
Is this component illuminated or reflector-only?
Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.
What details help with a wholesale quote?
Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.
Which physical points matter most?
Compare exposed shape, housing depth, locating tabs, fastener spacing and any electrical connector.
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
Request a Product-Specific Quote
For mixed shipments, send a line-by-line quantity list so each rear-bumper position is quoted independently.
