79311TT0H01 Blower Motor for HONDA Civic
Primary OE reference: 79311TT0H01
Cross-reference 1: 79310TV1E01
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Civic
Brand: HONDA
Model: Civic
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79311TT0H01 Automotive Blower Motor Overview
This listing links 79311TT0H01 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6207-093, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6207-093 when comparing this 79311TT0H01 airflow configuration.
OE Reference and Application
The primary catalogue number is 79311TT0H01. The recorded application is HONDA Civic. For 6207-093, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6207-093 with the approved OE reference.
HVAC Interface and 79311TT0H01 installation
During work on 6207-093, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 79311TT0H01 installation. Recheck 6207-093 before the lower trim is closed.
For item 6207-093, confirm that the 79311TT0H01 centrifugal wheel clears its housing and that the 6207-093 connector lock engages without force. After seating 6207-093, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-093.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79311TT0H01 |
| Cross-reference numbers | 79310TV1E01 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | Confirm by OE reference |
| 79311TT0H01 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-093, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6207-093 record remains the picking reference.
For trade item 6207-093, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6207-093 on the packing instruction.
Frequently Asked Questions
How should item 6207-093 and blower number 79311TT0H01 be verified?
Match 6207-093 to the complete 79311TT0H01 marking, then compare the 6207-093 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-093 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-093; confirm steering position, climate-control specification and the original 6207-093 geometry before approval.
What circuit checks are useful when 6207-093 does not operate?
For 6207-093, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-093 motor again.
Which details should accompany a wholesale request for 6207-093?
Provide item 6207-093, OE 79311TT0H01, the stated application, quantity and destination; add 6207-093 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-093?
Clear debris from the air inlet, check that the 6207-093 wheel turns freely, seat the 6207-093 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-093: Send 79311TT0H01, the 6207-093 application and required quantity for a fitment and supply review.
