79310SDGW01 Blower Motor for HONDA Accord
Primary OE reference: 79310SDGW01
Cross-reference 1: 194000-7400
Cross-reference 2: 79310-SDC-A01
Cross-reference 3: 79310-SHJ-A01
Cross-reference 4: 79310-SDG-O00
Cross-reference 5: 79310SDAA01
Cross-reference 6: 79310SJCA03
Cross-reference 7: TYC
Cross-reference 8: 700003
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Accord
Brand: HONDA
Model: Accord
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310SDGW01 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 79310SDGW01 together with the 79310SDGW01 product images and vehicle data on this page.
For catalogue item 6207-076, the 79310SDGW01 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6207-076 when comparing this 79310SDGW01 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310SDGW01. The recorded application is HONDA Accord. For 6207-076, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6207-076 with the approved OE reference.
HVAC Interface and 79310SDGW01 installation
During work on 6207-076, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6207-076 before the lower trim is closed.
For item 6207-076, confirm that the 79310SDGW01 centrifugal wheel clears its housing and that the 6207-076 connector lock engages without force. After seating 6207-076, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-076.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310SDGW01 |
| Cross-reference numbers | 194000-7400 / 79310-SDC-A01 / 79310-SHJ-A01 / 79310-SDG-O00 / 79310SDAA01 / 79310SJCA03 / TYC / 700003 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | Confirm by OE reference |
| 79310SDGW01 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-076, Packing preparation accounts for the 79310SDGW01 motor weight and wheel shape to reduce movement inside the carton. The 6207-076 record remains the picking reference.
For trade item 6207-076, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6207-076 on the packing instruction.
Frequently Asked Questions
How should item 6207-076 and blower number 79310SDGW01 be verified?
Match 6207-076 to the complete 79310SDGW01 marking, then compare the 6207-076 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-076 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-076; confirm steering position, climate-control specification and the original 6207-076 geometry before approval.
What circuit checks are useful when 6207-076 does not operate?
For 6207-076, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-076 motor again.
Which details should accompany a wholesale request for 6207-076?
Provide item 6207-076, OE 79310SDGW01, the stated application, quantity and destination; add 6207-076 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-076?
Clear debris from the air inlet, check that the 6207-076 wheel turns freely, seat the 6207-076 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-076: Send 79310SDGW01, the 6207-076 application and required quantity for a fitment and supply review.
