79310S6M013 Blower Motor for HONDA Civic
Primary OE reference: 79310S6M013
Cross-reference 1: 8310030352
Cross-reference 2: 3G70064752
Cross-reference 3: 3R2305J12
Cross-reference 4: 3R2300A28
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Civic
Brand: HONDA
Model: Civic
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310S6M013 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 79310S6M013 for application-led sourcing.
For catalogue item 6207-086, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6207-086 when comparing this 79310S6M013 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310S6M013. The recorded application is HONDA Civic. For 6207-086, Measure the 79310S6M013 wheel height and outer diameter, then compare the electrical socket and base contour with the 79310S6M013 product photos. Record 6207-086 with the approved OE reference.
HVAC Interface and 79310S6M013 installation
During work on 6207-086, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 79310S6M013 installation. Recheck 6207-086 before the lower trim is closed.
For item 6207-086, confirm that the 79310S6M013 centrifugal wheel clears its housing and that the 6207-086 connector lock engages without force. After seating 6207-086, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-086.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310S6M013 |
| Cross-reference numbers | 8310030352 / 3G70064752 / 3R2305J12 / 3R2300A28 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | Confirm by OE reference |
| 79310S6M013 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-086, Packing preparation accounts for the 79310S6M013 motor weight and wheel shape to reduce movement inside the carton. The 6207-086 record remains the picking reference.
For trade item 6207-086, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6207-086 on the packing instruction.
Frequently Asked Questions
How should item 6207-086 and blower number 79310S6M013 be verified?
Match 6207-086 to the complete 79310S6M013 marking, then compare the 6207-086 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-086 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-086; confirm steering position, climate-control specification and the original 6207-086 geometry before approval.
What circuit checks are useful when 6207-086 does not operate?
For 6207-086, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-086 motor again.
Which details should accompany a wholesale request for 6207-086?
Provide item 6207-086, OE 79310S6M013, the stated application, quantity and destination; add 6207-086 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-086?
Clear debris from the air inlet, check that the 6207-086 wheel turns freely, seat the 6207-086 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-086: Send 79310S6M013, the 6207-086 application and required quantity for a fitment and supply review.
