79310-T9A-F01 Blower Motor for HONDA City
Primary OE reference: 79310-T9A-F01
Cross-reference 1: 1512579
Cross-reference 2: 272700-1480
Cross-reference 3: 272700-1500
Cross-reference 4: 8710312110
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA City
Brand: HONDA
Model: City
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310-T9A-F01 Automotive Blower Motor Overview
Reference 79310-T9A-F01 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6207-025, the 79310-T9A-F01 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6207-025 when comparing this 79310-T9A-F01 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310-T9A-F01. The recorded application is HONDA City. For 6207-025, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6207-025 with the approved OE reference.
HVAC Interface and 79310-T9A-F01 installation
During work on 6207-025, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6207-025 before the lower trim is closed.
For item 6207-025, confirm that the 79310-T9A-F01 centrifugal wheel clears its housing and that the 6207-025 connector lock engages without force. After seating 6207-025, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-025.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310-T9A-F01 |
| Cross-reference numbers | 1512579 / 272700-1480 / 272700-1500 / 8710312110 |
| Vehicle brand | HONDA |
| Vehicle model | City |
| Model year | Confirm by OE reference |
| 79310-T9A-F01 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-025, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6207-025 record remains the picking reference.
For trade item 6207-025, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6207-025 on the packing instruction.
Frequently Asked Questions
How should item 6207-025 and blower number 79310-T9A-F01 be verified?
Match 6207-025 to the complete 79310-T9A-F01 marking, then compare the 6207-025 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-025 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-025; confirm steering position, climate-control specification and the original 6207-025 geometry before approval.
What circuit checks are useful when 6207-025 does not operate?
For 6207-025, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-025 motor again.
Which details should accompany a wholesale request for 6207-025?
Provide item 6207-025, OE 79310-T9A-F01, the stated application, quantity and destination; add 6207-025 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-025?
Clear debris from the air inlet, check that the 6207-025 wheel turns freely, seat the 6207-025 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-025: Send 79310-T9A-F01, the 6207-025 application and required quantity for a fitment and supply review.
