79310-T0C-003 Blower Motor for HONDA CR-V 2012-2016
Primary OE reference: 79310-T0C-003
Cross-reference 1: 272700-5990
Cross-reference 2: 324
Cross-reference 3: 79310T2AU01
Cross-reference 4: KM12020
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA CR-V 2012-2016
Brand: HONDA
Model: CR-V
Vehicle year: 2012-2016
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310-T0C-003 Automotive Blower Motor Overview
This product entry documents the 79310-T0C-003 blower unit with practical identification and 79310-T0C-003 installation checkpoints.
For catalogue item 6207-066, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 79310-T0C-003 blower important at idle and in traffic. Use 6207-066 when comparing this 79310-T0C-003 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310-T0C-003. The recorded application is HONDA CR-V 2012-2016. For 6207-066, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6207-066 with the approved OE reference.
HVAC Interface and 79310-T0C-003 installation
During work on 6207-066, After 79310-T0C-003 installation, operate low through high speed and confirm 79310-T0C-003 airflow reaches the selected vents without abnormal vibration. Recheck 6207-066 before the lower trim is closed.
For item 6207-066, confirm that the 79310-T0C-003 centrifugal wheel clears its housing and that the 6207-066 connector lock engages without force. After seating 6207-066, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-066.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310-T0C-003 |
| Cross-reference numbers | 272700-5990 / 324 / 79310T2AU01 / KM12020 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2012-2016 |
| 79310-T0C-003 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-066, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6207-066 record remains the picking reference.
For trade item 6207-066, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6207-066 on the packing instruction.
Frequently Asked Questions
How should item 6207-066 and blower number 79310-T0C-003 be verified?
Match 6207-066 to the complete 79310-T0C-003 marking, then compare the 6207-066 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-066 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-066; confirm steering position, climate-control specification and the original 6207-066 geometry before approval.
What circuit checks are useful when 6207-066 does not operate?
For 6207-066, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-066 motor again.
Which details should accompany a wholesale request for 6207-066?
Provide item 6207-066, OE 79310-T0C-003, the stated application, quantity and destination; add 6207-066 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-066?
Clear debris from the air inlet, check that the 6207-066 wheel turns freely, seat the 6207-066 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-066: Send 79310-T0C-003, the 6207-066 application and required quantity for a fitment and supply review.
