79310-ST3-G01 Blower Motor for HONDA Civic
Primary OE reference: 79310-ST3-G01
Cross-reference 1: JGC100150
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Civic
Brand: HONDA
Model: Civic
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310-ST3-G01 Automotive Blower Motor Overview
This product entry documents the 79310-ST3-G01 blower unit with practical identification and 79310-ST3-G01 installation checkpoints.
For catalogue item 6207-040, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 79310-ST3-G01 blower important at idle and in traffic. Use 6207-040 when comparing this 79310-ST3-G01 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310-ST3-G01. The recorded application is HONDA Civic. For 6207-040, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6207-040 with the approved OE reference.
HVAC Interface and 79310-ST3-G01 installation
During work on 6207-040, After 79310-ST3-G01 installation, operate low through high speed and confirm 79310-ST3-G01 airflow reaches the selected vents without abnormal vibration. Recheck 6207-040 before the lower trim is closed.
For item 6207-040, confirm that the 79310-ST3-G01 centrifugal wheel clears its housing and that the 6207-040 connector lock engages without force. After seating 6207-040, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-040.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310-ST3-G01 |
| Cross-reference numbers | JGC100150 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | Confirm by OE reference |
| 79310-ST3-G01 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-040, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6207-040 record remains the picking reference.
For trade item 6207-040, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6207-040 on the packing instruction.
Frequently Asked Questions
How should item 6207-040 and blower number 79310-ST3-G01 be verified?
Match 6207-040 to the complete 79310-ST3-G01 marking, then compare the 6207-040 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-040 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-040; confirm steering position, climate-control specification and the original 6207-040 geometry before approval.
What circuit checks are useful when 6207-040 does not operate?
For 6207-040, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-040 motor again.
Which details should accompany a wholesale request for 6207-040?
Provide item 6207-040, OE 79310-ST3-G01, the stated application, quantity and destination; add 6207-040 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-040?
Clear debris from the air inlet, check that the 6207-040 wheel turns freely, seat the 6207-040 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-040: Send 79310-ST3-G01, the 6207-040 application and required quantity for a fitment and supply review.
