79310-SNB-013 Blower Motor for HONDA Civic 2008
Primary OE reference: 79310-SNB-013
Cross-reference 1: TYC700194
Cross-reference 2: 79310SNKK01
Cross-reference 3: TG116360-03004D
Cross-reference 4: 79310SNB023
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Civic 2008
Brand: HONDA
Model: Civic
Vehicle year: 2008
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
79310-SNB-013 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 79310-SNB-013 together with the 79310-SNB-013 product images and vehicle data on this page.
For catalogue item 6207-067, the 79310-SNB-013 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6207-067 when comparing this 79310-SNB-013 airflow configuration.
OE Reference and Application
The primary catalogue number is 79310-SNB-013. The recorded application is HONDA Civic 2008. For 6207-067, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6207-067 with the approved OE reference.
HVAC Interface and 79310-SNB-013 installation
During work on 6207-067, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6207-067 before the lower trim is closed.
For item 6207-067, confirm that the 79310-SNB-013 centrifugal wheel clears its housing and that the 6207-067 connector lock engages without force. After seating 6207-067, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-067.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 79310-SNB-013 |
| Cross-reference numbers | TYC700194 / 79310SNKK01 / TG116360-03004D / 79310SNB023 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | 2008 |
| 79310-SNB-013 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-067, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6207-067 record remains the picking reference.
For trade item 6207-067, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6207-067 on the packing instruction.
Frequently Asked Questions
How should item 6207-067 and blower number 79310-SNB-013 be verified?
Match 6207-067 to the complete 79310-SNB-013 marking, then compare the 6207-067 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-067 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-067; confirm steering position, climate-control specification and the original 6207-067 geometry before approval.
What circuit checks are useful when 6207-067 does not operate?
For 6207-067, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-067 motor again.
Which details should accompany a wholesale request for 6207-067?
Provide item 6207-067, OE 79310-SNB-013, the stated application, quantity and destination; add 6207-067 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-067?
Clear debris from the air inlet, check that the 6207-067 wheel turns freely, seat the 6207-067 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-067: Send 79310-SNB-013, the 6207-067 application and required quantity for a fitment and supply review.
