7802A327 Blower Motor for MITSUBISHI Outlander
Primary OE reference: 7802A327
Cross-reference 1: CSA431D247B
Cross-reference 2: 700349
Cross-reference 3: 7802A326
Cross-reference 4: 10052C
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI Outlander
Brand: MITSUBISHI
Model: Outlander
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7802A327 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 7802A327 to support OE-number comparison before purchase.
For catalogue item 6215-008, Cabin 7802A327 airflow depends on the 7802A327 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6215-008 when comparing this 7802A327 airflow configuration.
OE Reference and Application
The primary catalogue number is 7802A327. The recorded application is MITSUBISHI Outlander. For 6215-008, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6215-008 with the approved OE reference.
HVAC Interface and 7802A327 installation
During work on 6215-008, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6215-008 before the lower trim is closed.
For item 6215-008, confirm that the 7802A327 centrifugal wheel clears its housing and that the 6215-008 connector lock engages without force. After seating 6215-008, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-008.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7802A327 |
| Cross-reference numbers | CSA431D247B / 700349 / 7802A326 / 10052C |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Outlander |
| Model year | Confirm by OE reference |
| 7802A327 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-008, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6215-008 record remains the picking reference.
For trade item 6215-008, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6215-008 on the packing instruction.
Frequently Asked Questions
How should item 6215-008 and blower number 7802A327 be verified?
Match 6215-008 to the complete 7802A327 marking, then compare the 6215-008 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-008 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-008; confirm steering position, climate-control specification and the original 6215-008 geometry before approval.
What circuit checks are useful when 6215-008 does not operate?
For 6215-008, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-008 motor again.
Which details should accompany a wholesale request for 6215-008?
Provide item 6215-008, OE 7802A327, the stated application, quantity and destination; add 6215-008 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-008?
Clear debris from the air inlet, check that the 6215-008 wheel turns freely, seat the 6215-008 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-008: Send 7802A327, the 6215-008 application and required quantity for a fitment and supply review.
