77103-SAA-011 Front Bumper Grille for HONDA Fit 2004
OE lookup: 77103-SAA-011 as the primary lookup number
Catalogue code: HD02004-026 for quotation and order tracking
Make: HONDA
Model line: Fit (2004)
Fitment record: 2004 HONDA Fit; verify by VIN and original part
Mounting area: Front bumper area
Reference numbers:
77103-SAA-011
Fitment check: Compare the removed grille with the saved product views before approval
Purchase note: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 77103-SAA-011 on Fit uses HD02004-026 as the controlled front-bumper line; compare Fit frame contour, 77103-SAA-011 mesh geometry and HD02004-026 attachment direction
Approval record: HD02004-026 should link the 2004 HONDA Fit vehicle evidence to 77103-SAA-011; retain Fit opening photos and front grille measurements with the buyer decision
Component: Front Bumper Grille for 2004 HONDA Fit
77103-SAA-011 Front Bumper Grille Product Overview
OE number 77103-SAA-011 is the primary lookup key for this front bumper grille used on 2004 HONDA Fit. Distributors can quote item HD02004-026 while repair teams compare the original bumper opening with the supplied image record.
OE-Led Fitment Verification for 77103-SAA-011
Fitment confidence requires three agreeing sources: 77103-SAA-011, 2004 HONDA Fit and the physical front grille. Do not approve HD02004-026 from a similar mesh pattern alone.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Fit Bumper Grille Function and Position
The front grille area is sensitive to trim and market changes. For this Fit item, frame dimensions, mesh layout and mounting tabs must agree with the original component.
The source application is recorded as 2004 两相飞度 前杠网格. This retained catalogue wording helps trace market, trim and body-style distinctions during buyer verification.
Inspection, Packaging and Receiving Control
For HD02004-026, quality control begins with identity: confirm 77103-SAA-011 and the stated front bumper grille. Next review deformation, edge damage, mounting features and colour or texture consistency under neutral light.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
Workshop Handling and Installation Review
Professional trial fitting is recommended for HD02004-026. Confirm that the Fit bumper skin, side guides and underbody connections are correctly seated before judging grille alignment.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
Product-Specific Approval Record for 77103-SAA-011
The following review points belong to HD02004-026 and the stated 2004 HONDA Fit application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Vehicle evidence 1 — Fit / 77103-SAA-011: compare clip spacing without bending the replacement grille for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Catalogue proof 2 — HD02004-026 / Front: retain a signed control sample for repeat purchasing decisions for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Packing control 3 — 2004 HONDA Fit / HD02004-026: compare adjacent moulding gaps before locking the centre clips for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Identity gate 4 — 77103-SAA-011 / HD02004-026: inspect mounting slots for collision distortion before trial fitting for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Workshop checkpoint 5 — Fit / 77103-SAA-011: verify the photographed part and physical sample share one revision for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Receiving record 6 — HD02004-026 / Front: record the mesh orientation alongside the vehicle production label for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Fitment file 7 — 2004 HONDA Fit / HD02004-026: mark lamp or trim interfaces on the buyer approval photograph for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Geometry control 8 — 77103-SAA-011 / HD02004-026: note surface texture under neutral lighting before installation for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Sample decision 9 — Fit / 77103-SAA-011: link receiving photographs to the commercial order-line number for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Order trace 10 — HD02004-026 / Front: record any market-specific openings shown on the original bumper for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Vehicle evidence 11 — 2004 HONDA Fit / HD02004-026: match the grille outline to the stated body style and facelift for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Catalogue proof 12 — 77103-SAA-011 / HD02004-026: measure the outer frame before comparing the retained bumper aperture for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Packing control 13 — Fit / 77103-SAA-011: check the centre section against the bumper cover reference points for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Identity gate 14 — HD02004-026 / Front: confirm the lower edge follows the original underbody connection for Fit item HD02004-026 under OE reference 77103-SAA-011.
- Workshop checkpoint 15 — 2004 HONDA Fit / HD02004-026: verify left and right orientation from the vehicle-facing side for Fit item HD02004-026 under OE reference 77103-SAA-011.
Application Evidence Narrative for HD02004-026
This page documents 77103-SAA-011, a front bumper grille associated with 2004 HONDA Fit. Rather than treating grille parts as universal, the listing keeps internal reference HD02004-026 and the stated application visible for technical review.
The front bumper grille occupies the front exterior fascia of the Fit. It should align with the bumper cover, neighbouring trim and air-entry zone without being confused with the crash beam behind it.
For 2004 HONDA Fit exterior repair sourcing, reference 77103-SAA-011 points to the listed front bumper grille. Catalogue item HD02004-026 is presented with fitment evidence that helps buyers separate it from nearby bumper variants.
The front bumper grille forms part of the Fit bumper assembly rather than a universal mesh insert. Its service role is to restore the correct opening, surrounding body line and attachment interface.
OE number 77103-SAA-011 is the primary lookup key for this front bumper grille used on 2004 HONDA Fit. Distributors can quote item HD02004-026 while repair teams compare the original bumper opening with the supplied image record.
Mounted in the front bumper area, a front bumper grille completes a defined opening and supports the intended visual and airflow path of the Fit. Its perimeter, mesh pattern and fastening points are vehicle-specific.
The identity chain for HD02004-026 is HONDA Fit, 2004, front bumper position and OE 77103-SAA-011. Keep HD02004-026 beside Fit vehicle evidence, keep 77103-SAA-011 beside the removed grille marking, and keep the front location beside the approval photographs.
77103-SAA-011 Front Bumper Grille for HONDA Fit 2004 is the controlled search entity for this page. In a buyer file, 77103-SAA-011 should lead the Fit comparison, HD02004-026 should lead the supplier trace, and 2004 HONDA Fit should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 77103-SAA-011 |
| Cross-reference numbers | 77103-SAA-011 |
| Internal item code | HD02004-026 |
| Vehicle brand | HONDA |
| Vehicle model | Fit |
| Model year | 2004 |
| Installation position | Front bumper area |
| Applicable vehicle | 2004 HONDA Fit |
Wholesale Procurement for HD02004-026
The clearest B2B request combines 77103-SAA-011, supplier code HD02004-026, 2004 HONDA Fit and destination. This makes it easier to separate technical approval from commercial terms and shipping choices.
This page is intended to answer the central sourcing questions around 77103-SAA-011: what it is, where it fits, how it should be checked and what purchasing data is required.
Frequently Asked Questions
Can this front bumper grille fit every Fit?
No universal-fit claim is made. Facelift, body style, region and trim can change the grille.
Why is the bumper position important for 77103-SAA-011?
Front, rear, upper, lower and side grille pieces are not interchangeable. This record describes the front bumper location.
Are brackets, emblems and fasteners included with 77103-SAA-011?
Supply scope follows the pictured HD02004-026 component. Confirm loose hardware, badges, covers and accessories with the quotation before ordering.
How should 77103-SAA-011 be checked after delivery?
Verify identity first, then inspect the front bumper grille frame, mesh, tabs, finish and packing-related distortion before installation.
Where is the 77103-SAA-011 grille installed on the Fit?
The listing places it in the front bumper area of the Fit. It is not presented as a complete bumper cover or crash reinforcement.
Request a Product and Fitment Review
Send the complete OE reference 77103-SAA-011, item code HD02004-026, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
