7701057556 Blower Motor for RENAULT Master II
Primary OE reference: 7701057556
Cross-reference 1: 93181460
Cross-reference 2: 4415548
Cross-reference 3: 8EW009158-221
Cross-reference 4: 87763
Cross-reference 5: 2720500QAL
Product type: Automotive HVAC Blower Motor
Applicable vehicle: RENAULT Master II
Brand: RENAULT
Model: Master II
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7701057556 Automotive Blower Motor Overview
This listing links 7701057556 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6229-025, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6229-025 when comparing this 7701057556 airflow configuration.
OE Reference and Application
The primary catalogue number is 7701057556. The recorded application is RENAULT Master II. For 6229-025, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6229-025 with the approved OE reference.
HVAC Interface and 7701057556 installation
During work on 6229-025, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 7701057556 installation. Recheck 6229-025 before the lower trim is closed.
For item 6229-025, confirm that the 7701057556 centrifugal wheel clears its housing and that the 6229-025 connector lock engages without force. After seating 6229-025, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6229-025.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7701057556 |
| Cross-reference numbers | 93181460 / 4415548 / 8EW009158-221 / 87763 / 2720500QAL |
| Vehicle brand | RENAULT |
| Vehicle model | Master II |
| Model year | Confirm by OE reference |
| 7701057556 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6229-025, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6229-025 record remains the picking reference.
For trade item 6229-025, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6229-025 on the packing instruction.
Frequently Asked Questions
How should item 6229-025 and blower number 7701057556 be verified?
Match 6229-025 to the complete 7701057556 marking, then compare the 6229-025 plug, terminal count, mounting flange and wheel dimensions with the removed RENAULT unit.
Can 6229-025 have more than one vehicle-side blower configuration?
Yes. RENAULT production changes can affect 6229-025; confirm steering position, climate-control specification and the original 6229-025 geometry before approval.
What circuit checks are useful when 6229-025 does not operate?
For 6229-025, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6229-025 motor again.
Which details should accompany a wholesale request for 6229-025?
Provide item 6229-025, OE 7701057556, the stated application, quantity and destination; add 6229-025 carton or private-label requirements separately.
How can noise be avoided after fitting 6229-025?
Clear debris from the air inlet, check that the 6229-025 wheel turns freely, seat the 6229-025 flange evenly and keep wiring away from the impeller.
Request a quote for 6229-025: Send 7701057556, the 6229-025 application and required quantity for a fitment and supply review.
