7701055134 Blower Motor for RENAULT
Primary OE reference: 7701055134
Product type: Automotive HVAC Blower Motor
Applicable vehicle: RENAULT
Brand: RENAULT
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7701055134 Automotive Blower Motor Overview
This listing links 7701055134 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6229-063, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6229-063 when comparing this 7701055134 airflow configuration.
OE Reference and Application
The primary catalogue number is 7701055134. The recorded application is RENAULT. For 6229-063, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6229-063 with the approved OE reference.
HVAC Interface and 7701055134 installation
During work on 6229-063, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 7701055134 installation. Recheck 6229-063 before the lower trim is closed.
For item 6229-063, confirm that the 7701055134 centrifugal wheel clears its housing and that the 6229-063 connector lock engages without force. After seating 6229-063, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6229-063.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7701055134 |
| Cross-reference numbers | 7701055134 |
| Vehicle brand | RENAULT |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 7701055134 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6229-063, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6229-063 record remains the picking reference.
For trade item 6229-063, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6229-063 on the packing instruction.
Frequently Asked Questions
How should item 6229-063 and blower number 7701055134 be verified?
Match 6229-063 to the complete 7701055134 marking, then compare the 6229-063 plug, terminal count, mounting flange and wheel dimensions with the removed RENAULT unit.
Can 6229-063 have more than one vehicle-side blower configuration?
Yes. RENAULT production changes can affect 6229-063; confirm steering position, climate-control specification and the original 6229-063 geometry before approval.
What circuit checks are useful when 6229-063 does not operate?
For 6229-063, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6229-063 motor again.
Which details should accompany a wholesale request for 6229-063?
Provide item 6229-063, OE 7701055134, the stated application, quantity and destination; add 6229-063 carton or private-label requirements separately.
How can noise be avoided after fitting 6229-063?
Clear debris from the air inlet, check that the 6229-063 wheel turns freely, seat the 6229-063 flange evenly and keep wiring away from the impeller.
Request a quote for 6229-063: Send 7701055134, the 6229-063 application and required quantity for a fitment and supply review.
