7701050310 Blower Motor for RENAULT Trafic II
Primary OE reference: 7701050310
Cross-reference 1: 4409448
Cross-reference 2: 91158687
Cross-reference 3: 21-0054
Cross-reference 4: 2761400QAC
Product type: Automotive HVAC Blower Motor
Applicable vehicle: RENAULT Trafic II
Brand: RENAULT
Model: Trafic II
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
7701050310 Automotive Blower Motor Overview
Reference 7701050310 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6229-012, the 7701050310 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6229-012 when comparing this 7701050310 airflow configuration.
OE Reference and Application
The primary catalogue number is 7701050310. The recorded application is RENAULT Trafic II. For 6229-012, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6229-012 with the approved OE reference.
HVAC Interface and 7701050310 installation
During work on 6229-012, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6229-012 before the lower trim is closed.
For item 6229-012, confirm that the 7701050310 centrifugal wheel clears its housing and that the 6229-012 connector lock engages without force. After seating 6229-012, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6229-012.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 7701050310 |
| Cross-reference numbers | 4409448 / 91158687 / 21-0054 / 2761400QAC |
| Vehicle brand | RENAULT |
| Vehicle model | Trafic II |
| Model year | Confirm by OE reference |
| 7701050310 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6229-012, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6229-012 record remains the picking reference.
For trade item 6229-012, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6229-012 on the packing instruction.
Frequently Asked Questions
How should item 6229-012 and blower number 7701050310 be verified?
Match 6229-012 to the complete 7701050310 marking, then compare the 6229-012 plug, terminal count, mounting flange and wheel dimensions with the removed RENAULT unit.
Can 6229-012 have more than one vehicle-side blower configuration?
Yes. RENAULT production changes can affect 6229-012; confirm steering position, climate-control specification and the original 6229-012 geometry before approval.
What circuit checks are useful when 6229-012 does not operate?
For 6229-012, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6229-012 motor again.
Which details should accompany a wholesale request for 6229-012?
Provide item 6229-012, OE 7701050310, the stated application, quantity and destination; add 6229-012 carton or private-label requirements separately.
How can noise be avoided after fitting 6229-012?
Clear debris from the air inlet, check that the 6229-012 wheel turns freely, seat the 6229-012 flange evenly and keep wiring away from the impeller.
Request a quote for 6229-012: Send 7701050310, the 6229-012 application and required quantity for a fitment and supply review.
