76886-TP6-Y01 Front Left Headlight Washer Nozzle Cover for HONDA Crosstour 2011
Primary OE reference: 76886-TP6-Y01
Cross-reference number 1: 76886-TP6-Y01
Cross-reference number 2: 76886TP6Y01
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: HONDA Crosstour 2011
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Crosstour
Model year: 2011
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-011
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76886-TP6-Y01 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 76886-TP6-Y01 is a front left headlight washer nozzle cover intended for HONDA Crosstour 2011. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Crosstour
Compatibility for 76886-TP6-Y01 should be confirmed against HONDA Crosstour 2011 and the left installation side. The review should match the mounting pattern around the bumper aperture, compare the hose connection or cover hinge with the original part, and check the production date where model-year transitions overlap. Use the removed part and product photographs to retain the removed component for a direct physical comparison, confirm whether a cap, nozzle, bracket or complete assembly is required, and compare the actuator orientation behind the bumper cover; finally, verify that the OE reference is not for the opposite side and inspect the bumper cutout shape and surrounding contour.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-011 should be checked separately. For this headlight washer nozzle cover, review the sealing area around the hose connection, check the bumper-facing surface for transport marks, and inspect the actuator barrel for impact damage. A direct comparison with the removed part should additionally compare the retracted position with the bumper surface, review the hose spigot angle on the washer nozzle, and check the nozzle outlet orientation. Before the item is accepted, inspect narrow plastic tips before installation and compare the distance between mounting points.
OE Identification and Side Confirmation
76886-TP6-Y01 is the primary OE identity for this left front left headlight washer nozzle cover, while HD02010-011 is the internal item code. Match both references to the vehicle record, then check whether the original cover is supplied separately from its support. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-011 begins before the bumper area is disturbed: paint or finish visible covers before final installation when required and inspect the bumper opening after the trial fit. During trial fitting, trial-fit the component before final fastening, support the bumper cover while accessing the hidden actuator, and compare the installed height with the opposite side. Before returning the vehicle to service, retain the original fasteners unless replacements are specified, route the washer hose away from sharp edges, and tighten bracket hardware only after alignment.
Receiving Inspection
When HD02010-011 arrives, receiving staff should verify the cover contour against the approved product photograph, review the production finish against the approved sample, and record carton damage before the item is moved to workshop stock. Before workshop release, document any shortage before the receiving inspection is closed, inspect mounting holes for flash, blockage or edge damage, protect the visible face again after inspection is complete, and separate mirrored components immediately after carton opening. Complete the inspection by ensuring that staff confirm the nozzle outlet is clean and unobstructed, check the actuator body for straightness before trial installation, and check the spring-return area where the component includes an actuator.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76886-TP6-Y01 |
| Cross-reference numbers | 76886-TP6-Y01 76886TP6Y01 |
| Internal item code | HD02010-011 |
| Vehicle brand | HONDA |
| Vehicle model | Crosstour |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Crosstour 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76886-TP6-Y01, please request replacement-part documentation when required, protect hose spigots and projecting tabs, and confirm pallet requirements for larger quantities. Packing instructions should provide the complete destination address or port, confirm whether caps and nozzles should be supplied as pairs, and confirm sample approval before mass shipment. Before dispatch, request protective inner wrapping for painted faces and confirm the preferred incoterm.
Frequently Asked Questions
What should be inspected when 76886-TP6-Y01 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For item HD02010-011, the approval should inspect the fluid passage only with clean, non-damaging tools. The same item record should also compare connector depth and hose angle with the retained original part.
Does the finish specification matter for 76886-TP6-Y01?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. On the listed HONDA Crosstour 2011, technicians should check whether the visible part requires painting. A workshop comparison should additionally check the bumper-facing surface for transport marks.
Is workshop installation recommended for 76886-TP6-Y01?
Yes. A qualified workshop can access the bumper area on the Crosstour, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, retain the original fasteners unless replacements are specified. The order review should further verify that the cover closes without rubbing the bumper.
Which vehicle application is listed for 76886-TP6-Y01?
76886-TP6-Y01 is listed for HONDA Crosstour 2011. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. The product-specific check for 76886-TP6-Y01 should confirm that the listed model designation matches the vehicle. Receiving staff should also compare the actuator orientation behind the bumper cover.
Can 76886-TP6-Y01 fit every Crosstour model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. Before this headlight washer nozzle cover is accepted, retain the removed component for a direct physical comparison. Before approval, the buyer or technician should separate mirrored left and right items during inventory selection.
