76886-TL0-S01 Front Left Headlight Washer Nozzle Cover for HONDA Spirior 2009
Primary OE reference: 76886-TL0-S01
Cross-reference number 1: 76886-TL0-S01
Cross-reference number 2: 76886TL0S01
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: HONDA Spirior 2009
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Spirior
Model year: 2009
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-015
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76886-TL0-S01 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 76886-TL0-S01 is a front left headlight washer nozzle cover intended for HONDA Spirior 2009. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Spirior
Compatibility for 76886-TL0-S01 should be confirmed against HONDA Spirior 2009 and the left installation side. The review should check the production date where model-year transitions overlap, check whether the original cover is supplied separately from its support, and compare the washer opening beside the correct headlamp. Use the removed part and product photographs to verify nearby parking-sensor or trim interfaces, match the exact model year and bumper revision, and inspect the bumper cutout shape and surrounding contour; finally, use the full OE number, not a partial family reference and retain the removed component for a direct physical comparison.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-015 should be checked separately. For this headlight washer nozzle cover, review the left-to-right mirrored geometry, compare the outer surface profile with the bumper opening, and inspect the actuator barrel for impact damage. A direct comparison with the removed part should additionally check the fluid inlet for storage contamination, review any paint-preparation requirement before fitting, and compare the distance between mounting points. Before the item is accepted, inspect the telescopic body for smooth movement and check each molded locator against the original component.
OE Identification and Side Confirmation
76886-TL0-S01 is the primary OE identity for this left front left headlight washer nozzle cover, while HD02010-015 is the internal item code. Match both references to the vehicle record, then check the washer jet position relative to the headlamp lens. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-015 begins before the bumper area is disturbed: test for drips after the washer pump stops and check the headlamp lens receives an even spray. During trial fitting, photograph the original routing before disassembly, inspect the bumper opening after the trial fit, and confirm that no hose is pinched behind the bumper. Before returning the vehicle to service, retain the original fasteners unless replacements are specified, complete a final visual check under even lighting, and reconfirm the OE number before discarding the packaging.
Receiving Inspection
When HD02010-015 arrives, receiving staff should verify the supplied scope before discarding dividers or inner bags, compare the visible surface texture with the ordered specification, and verify the nozzle head returns smoothly without applying excess force. Before workshop release, compare left and right orientation before removing protective wrapping, inspect mounting holes for flash, blockage or edge damage, confirm that small seals or clips have not remained in the wrapping, and compare the supplied side with the vehicle repair order. Complete the inspection by ensuring that staff check the spring-return area where the component includes an actuator, photograph the received item if the vehicle fitment is still pending, and review the production finish against the approved sample.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76886-TL0-S01 |
| Cross-reference numbers | 76886-TL0-S01 76886TL0S01 |
| Internal item code | HD02010-015 |
| Vehicle brand | HONDA |
| Vehicle model | Spirior |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Spirior 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76886-TL0-S01, please send photographs of the removed washer part, separate left and right items on the packing list, and request export-carton dimensions before freight booking. Packing instructions should check carton labels at receiving, confirm pallet requirements for larger quantities, and confirm sample approval before mass shipment. Before dispatch, identify painted and unpainted variants on separate lines and include the full OE reference on the purchase order.
Frequently Asked Questions
Why must left and right versions of 76886-TL0-S01 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item HD02010-015, the approval should compare the cap perimeter and corner radii. The same item record should also check whether the visible part requires painting.
How should 76886-TL0-S01 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. On the listed HONDA Spirior 2009, technicians should verify that the OE reference is not for the opposite side. A workshop comparison should additionally match the exact model year and bumper revision.
What information should accompany a 76886-TL0-S01 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For the left-side order line, confirm the acceptable delivery window. The order review should further use dividers to prevent caps from rubbing each other.
Which vehicle application is listed for 76886-TL0-S01?
76886-TL0-S01 is listed for HONDA Spirior 2009. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. The product-specific check for 76886-TL0-S01 should compare the hose connection or cover hinge with the original part. Receiving staff should also compare the actuator orientation behind the bumper cover.
Is 76886-TL0-S01 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle cover is accepted, list model years and bumper versions for mixed orders. Before approval, the buyer or technician should confirm the acceptable delivery window.
