76886-TA1-M02 Front Left Headlight Washer Nozzle Cover for HONDA Accord 2011
Primary OE reference: 76886-TA1-M02
Cross-reference number 1: 76886-TA1-M02
Cross-reference number 2: 76886TA1M02
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: HONDA Accord 2011
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Accord
Model year: 2011
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-007
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76886-TA1-M02 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 76886-TA1-M02 is a front left headlight washer nozzle cover intended for HONDA Accord 2011. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Accord
Compatibility for 76886-TA1-M02 should be confirmed against HONDA Accord 2011 and the left installation side. The review should separate mirrored left and right items during inventory selection, compare the washer opening beside the correct headlamp, and compare the actuator orientation behind the bumper cover. Use the removed part and product photographs to match the connector and fluid inlet position where applicable, check the washer jet position relative to the headlamp lens, and check whether the bumper is standard or sport specification; finally, retain the removed component for a direct physical comparison and compare the nozzle travel direction with the vehicle-side installation.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-007 should be checked separately. For this headlight washer nozzle cover, check the cap hinge or retaining point, review the sealing area around the hose connection, and compare the cap perimeter and corner radii. A direct comparison with the removed part should additionally inspect the telescopic body for smooth movement, check whether the visible part requires painting, and review the bracket stiffness and screw seats. Before the item is accepted, compare the outer surface profile with the bumper opening and inspect the rear reinforcement ribs.
OE Identification and Side Confirmation
76886-TA1-M02 is the primary OE identity for this left front left headlight washer nozzle cover, while HD02010-007 is the internal item code. Match both references to the vehicle record, then review facelift and pre-facelift washer layouts. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-007 begins before the bumper area is disturbed: confirm that the nozzle extends and retracts freely and use hand pressure rather than levering narrow plastic tabs. During trial fitting, confirm that the nozzle extends and retracts freely, use hand pressure rather than levering narrow plastic tabs, and confirm that the nozzle extends and retracts freely. Before returning the vehicle to service, use hand pressure rather than levering narrow plastic tabs, confirm that the nozzle extends and retracts freely, and use hand pressure rather than levering narrow plastic tabs.
Receiving Inspection
When HD02010-007 arrives, receiving staff should confirm the internal item code before mixed stock is shelved, verify the nozzle head returns smoothly without applying excess force, and protect the visible face again after inspection is complete. Before workshop release, check molded tabs for whitening, cracks or transport stress, compare left and right orientation before removing protective wrapping, inspect the rear locator shape without forcing any movable section, and check painted or primed surfaces under neutral lighting. Complete the inspection by ensuring that staff inspect mounting holes for flash, blockage or edge damage, retain the OE label until the washer system has passed its function test, and verify that protective plugs remain in open fluid connections.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76886-TA1-M02 |
| Cross-reference numbers | 76886-TA1-M02 76886TA1M02 |
| Internal item code | HD02010-007 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Accord 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76886-TA1-M02, please check carton labels at receiving, request protective inner wrapping for painted faces, and verify the packed quantity by OE reference. Packing instructions should retain the product label until fitment is confirmed, separate left and right items on the packing list, and request replacement-part documentation when required. Before dispatch, confirm the preferred incoterm and plug open fluid connections during packing.
Frequently Asked Questions
What should be inspected when 76886-TA1-M02 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For item HD02010-007, the approval should confirm the nozzle outlet is clean and unobstructed. The same item record should also confirm the internal item code before mixed stock is shelved.
Can product photographs alone confirm 76886-TA1-M02 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. On the listed HONDA Accord 2011, technicians should check the production date where model-year transitions overlap. A workshop comparison should additionally confirm the front bumper option before ordering.
How should 76886-TA1-M02 be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the left-side order line, protect each nozzle outlet from dust during transit. The order review should further use dividers to prevent caps from rubbing each other.
Can 76886-TA1-M02 fit every Accord model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. The product-specific check for 76886-TA1-M02 should check regional variations in headlamp-cleaning equipment. Receiving staff should also compare the actuator orientation behind the bumper cover.
Is workshop installation recommended for 76886-TA1-M02?
Yes. A qualified workshop can access the bumper area on the Accord, transfer hoses or clips safely and test the washer system for correct operation and leaks. Before this headlight washer nozzle cover is accepted, verify that the cover closes without rubbing the bumper. Before approval, the buyer or technician should check that the washer unit is fully seated in its guide.
