76886-SLE-S01 Front Left Headlight Washer Nozzle Cover for HONDA Odyssey 2009
Primary OE reference: 76886-SLE-S01
Cross-reference number 1: 76886-SLE-S01
Cross-reference number 2: 76886SLES01
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: HONDA Odyssey 2009
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Odyssey
Model year: 2009
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-027
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76886-SLE-S01 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 76886-SLE-S01 is a front left headlight washer nozzle cover intended for HONDA Odyssey 2009. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Odyssey
Compatibility for 76886-SLE-S01 should be confirmed against HONDA Odyssey 2009 and the left installation side. The review should confirm the destination-market equipment specification, review body-style differences within the same model generation, and retain the removed component for a direct physical comparison. Use the removed part and product photographs to use the full OE number, not a partial family reference, inspect the bumper cutout shape and surrounding contour, and match the exact model year and bumper revision; finally, verify nearby parking-sensor or trim interfaces and compare the washer opening beside the correct headlamp.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-027 should be checked separately. For this headlight washer nozzle cover, compare the outer surface profile with the bumper opening, inspect the hose connector for ovality, and check the bumper-facing surface for transport marks. A direct comparison with the removed part should additionally review the spring-loaded return features where fitted, compare the visible bumper-side contour, and inspect the actuator barrel for impact damage. Before the item is accepted, check whether the visible part requires painting and review the clip geometry on the rear face.
OE Identification and Side Confirmation
76886-SLE-S01 is the primary OE identity for this left front left headlight washer nozzle cover, while HD02010-027 is the internal item code. Match both references to the vehicle record, then confirm that the listed model designation matches the vehicle. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-027 begins before the bumper area is disturbed: transfer reusable clips only after checking their condition and route the washer hose away from sharp edges. During trial fitting, test the spray direction before returning the vehicle, replace distorted clips or damaged seals, and tighten bracket hardware only after alignment. Before returning the vehicle to service, confirm sufficient clearance behind the bumper, check that the washer unit is fully seated in its guide, and use hand pressure rather than levering narrow plastic tabs.
Receiving Inspection
When HD02010-027 arrives, receiving staff should confirm that small seals or clips have not remained in the wrapping, match the item label to the purchase order and OE reference, and check painted or primed surfaces under neutral lighting. Before workshop release, check the actuator body for straightness before trial installation, protect the visible face again after inspection is complete, record carton damage before the item is moved to workshop stock, and compare the visible surface texture with the ordered specification. Complete the inspection by ensuring that staff compare the supplied side with the vehicle repair order, confirm that loose accessories are identified on the packing list, and verify that protective plugs remain in open fluid connections.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76886-SLE-S01 |
| Cross-reference numbers | 76886-SLE-S01 76886SLES01 |
| Internal item code | HD02010-027 |
| Vehicle brand | HONDA |
| Vehicle model | Odyssey |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Odyssey 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76886-SLE-S01, please state the target vehicle application, provide the consignee and freight-forwarder details, and confirm sample approval before mass shipment. Packing instructions should state the required order quantity, separate left and right items on the packing list, and confirm whether caps and nozzles should be supplied as pairs. Before dispatch, request moisture protection for sea freight and state any outer-carton marking requirements.
Frequently Asked Questions
Are clips, hoses or fasteners supplied with 76886-SLE-S01?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For item HD02010-027, the approval should check carton labels at receiving. The same item record should also request moisture protection for sea freight.
Which vehicle application is listed for 76886-SLE-S01?
76886-SLE-S01 is listed for HONDA Odyssey 2009. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed HONDA Odyssey 2009, technicians should verify the required left or right installation side. A workshop comparison should additionally verify the required left or right installation side.
Is workshop installation recommended for 76886-SLE-S01?
Yes. A qualified workshop can access the bumper area on the Odyssey, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, retain the original fasteners unless replacements are specified. The order review should further verify that the cover closes without rubbing the bumper.
Which side uses 76886-SLE-S01?
This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. The product-specific check for 76886-SLE-S01 should review the left-to-right mirrored geometry. Receiving staff should also review the hose spigot angle on the washer nozzle.
Can product photographs alone confirm 76886-SLE-S01 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. Before this headlight washer nozzle cover is accepted, compare the actuator orientation behind the bumper cover. Before approval, the buyer or technician should check whether the original cover is supplied separately from its support.
