76885-TA1-M02 Front Left Headlight Washer Nozzle for HONDA Accord 2011
Primary OE reference: 76885-TA1-M02
Cross-reference number 1: 76885-TA1-M02
Cross-reference number 2: 76885TA1M02
Product type: Front Left Headlight Washer Nozzle
Vehicle application: HONDA Accord 2011
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Accord
Model year: 2011
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: HD02010-005
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76885-TA1-M02 Front Left Headlight Washer Nozzle Product Overview
The component shown under 76885-TA1-M02 is a front left headlight washer nozzle intended for HONDA Accord 2011. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Accord
Compatibility for 76885-TA1-M02 should be confirmed against HONDA Accord 2011 and the left installation side. The review should compare the actuator orientation behind the bumper cover, review body-style differences within the same model generation, and review facelift and pre-facelift washer layouts. Use the removed part and product photographs to review painted, primed and unpainted finish requirements, check the washer jet position relative to the headlamp lens, and match the mounting pattern around the bumper aperture; finally, verify nearby parking-sensor or trim interfaces and compare the complete OE marking with the removed washer component.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of HD02010-005 should be checked separately. For this headlight washer nozzle, compare the distance between mounting points, review the hose spigot angle on the washer nozzle, and check the bumper-facing surface for transport marks. A direct comparison with the removed part should additionally inspect the telescopic body for smooth movement, compare the support flange width, and review the clip geometry on the rear face. Before the item is accepted, check each molded locator against the original component and inspect the base bracket around every locating slot.
OE Identification and Side Confirmation
76885-TA1-M02 is the primary OE identity for this left front left headlight washer nozzle, while HD02010-005 is the internal item code. Match both references to the vehicle record, then verify the required left or right installation side. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-005 begins before the bumper area is disturbed: check that the washer unit is fully seated in its guide and avoid forcing a mirrored part into the bumper opening. During trial fitting, reconfirm the OE number before discarding the packaging, compare the installed height with the opposite side, and clean the hose and connector before assembly. Before returning the vehicle to service, work with the washer system depressurized, reconnect every hose clip before filling the system, and replace distorted clips or damaged seals.
Receiving Inspection
When HD02010-005 arrives, receiving staff should check the spring-return area where the component includes an actuator, inspect mounting holes for flash, blockage or edge damage, and compare the visible surface texture with the ordered specification. Before workshop release, check the carton partition for evidence of part-to-part contact, inspect the visible cover face for scratches or pressure marks, inspect the rear locator shape without forcing any movable section, and confirm the bumper-facing edge has not been compressed in transit. Complete the inspection by ensuring that staff check the actuator body for straightness before trial installation, document any shortage before the receiving inspection is closed, and check molded tabs for whitening, cracks or transport stress.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 76885-TA1-M02 |
| Cross-reference numbers | 76885-TA1-M02 76885TA1M02 |
| Internal item code | HD02010-005 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Accord 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76885-TA1-M02, please confirm the acceptable delivery window, state the required order quantity, and include the full OE reference on the purchase order. Packing instructions should request protective inner wrapping for painted faces, protect hose spigots and projecting tabs, and request export-carton dimensions before freight booking. Before dispatch, identify project stock and service stock separately and retain the product label until fitment is confirmed.
Frequently Asked Questions
Does the finish specification matter for 76885-TA1-M02?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For item HD02010-005, the approval should check whether the visible part requires painting. The same item record should also check the fluid inlet for storage contamination.
Can 76885-TA1-M02 fit every Accord model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed HONDA Accord 2011, technicians should verify the required left or right installation side. A workshop comparison should additionally verify the required left or right installation side.
How should 76885-TA1-M02 be packed for export?
The front left headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the left-side order line, state the target vehicle application. The order review should further use dividers to prevent caps from rubbing each other.
Are clips, hoses or fasteners supplied with 76885-TA1-M02?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. The product-specific check for 76885-TA1-M02 should request protective inner wrapping for painted faces. Receiving staff should also plug open fluid connections during packing.
Should the washer system be tested after fitting 76885-TA1-M02?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. Before this headlight washer nozzle is accepted, transfer reusable clips only after checking their condition. Before approval, the buyer or technician should check the headlamp lens receives an even spray.
