76881-TR0-S01 Front Right Headlight Washer Nozzle Cover for HONDA Civic 2012
Primary OE reference: 76881-TR0-S01
Cross-reference number 1: 76881-TR0-S01
Cross-reference number 2: 76881TR0S01
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: HONDA Civic 2012
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: Civic
Model year: 2012
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-018
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76881-TR0-S01 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 76881-TR0-S01 is a front right headlight washer nozzle cover intended for HONDA Civic 2012. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Civic
Compatibility for 76881-TR0-S01 should be confirmed against HONDA Civic 2012 and the right installation side. The review should check whether the bumper is standard or sport specification, check whether the original cover is supplied separately from its support, and confirm whether a cap, nozzle, bracket or complete assembly is required. Use the removed part and product photographs to confirm that the vehicle is equipped with a factory headlight washer system, match the connector and fluid inlet position where applicable, and compare the hose connection or cover hinge with the original part; finally, use the full OE number, not a partial family reference and check regional variations in headlamp-cleaning equipment.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-018 should be checked separately. For this headlight washer nozzle cover, review the clip geometry on the rear face, check the nozzle outlet orientation, and inspect the base bracket around every locating slot. A direct comparison with the removed part should additionally compare the cap-to-support engagement method, review the spring-loaded return features where fitted, and check the fluid inlet for storage contamination. Before the item is accepted, inspect narrow plastic tips before installation and compare the depth of the actuator body.
OE Identification and Side Confirmation
76881-TR0-S01 is the primary OE identity for this right front right headlight washer nozzle cover, while HD02010-018 is the internal item code. Match both references to the vehicle record, then inspect the bumper cutout shape and surrounding contour. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-018 begins before the bumper area is disturbed: check the system for leaks after reconnection and support the bumper cover while accessing the hidden actuator. During trial fitting, confirm sufficient clearance behind the bumper, reconnect every hose clip before filling the system, and photograph the original routing before disassembly. Before returning the vehicle to service, reconfirm the OE number before discarding the packaging, trial-fit the component before final fastening, and test the spray direction before returning the vehicle.
Receiving Inspection
When HD02010-018 arrives, receiving staff should check the carton partition for evidence of part-to-part contact, check the spring-return area where the component includes an actuator, and verify that protective plugs remain in open fluid connections. Before workshop release, protect the visible face again after inspection is complete, verify the supplied scope before discarding dividers or inner bags, review the production finish against the approved sample, and review the hose spigot for impact damage or distortion. Complete the inspection by ensuring that staff retain the OE label until the washer system has passed its function test, verify the nozzle head returns smoothly without applying excess force, and confirm that loose accessories are identified on the packing list.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76881-TR0-S01 |
| Cross-reference numbers | 76881-TR0-S01 76881TR0S01 |
| Internal item code | HD02010-018 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | 2012 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA Civic 2012 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76881-TR0-S01, please retain the product label until fitment is confirmed, confirm sample approval before mass shipment, and send photographs of the removed washer part. Packing instructions should list model years and bumper versions for mixed orders, provide the consignee and freight-forwarder details, and verify the packed quantity by OE reference. Before dispatch, identify the required installation side and state the target vehicle application.
Frequently Asked Questions
What should be inspected when 76881-TR0-S01 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For item HD02010-018, the approval should check the cap hinge or retaining point for free movement. The same item record should also check the cap hinge or retaining point for free movement.
How should 76881-TR0-S01 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. On the listed HONDA Civic 2012, technicians should review body-style differences within the same model generation. A workshop comparison should additionally confirm whether a cap, nozzle, bracket or complete assembly is required.
Should the washer system be tested after fitting 76881-TR0-S01?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For the right-side order line, reconfirm the OE number before discarding the packaging. The order review should further verify that the cover closes without rubbing the bumper.
Is 76881-TR0-S01 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. The product-specific check for 76881-TR0-S01 should confirm whether the visible cover needs a primed or finished surface. Receiving staff should also provide the complete destination address or port.
Why must left and right versions of 76881-TR0-S01 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. Before this headlight washer nozzle cover is accepted, compare the depth of the actuator body. Before approval, the buyer or technician should check the fluid inlet for storage contamination.
