76881-TOA-S01 Front Right Headlight Washer Nozzle Cover for HONDA CR-V 2012
Primary OE reference: 76881-TOA-S01
Cross-reference number 1: 76881-TOA-S01
Cross-reference number 2: 76881TOAS01
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: HONDA CR-V 2012
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: CR-V
Model year: 2012
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-022
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76881-TOA-S01 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 76881-TOA-S01 is a front right headlight washer nozzle cover intended for HONDA CR-V 2012. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for CR-V
Compatibility for 76881-TOA-S01 should be confirmed against HONDA CR-V 2012 and the right installation side. The review should compare product photographs with the removed part from several angles, use the full OE number, not a partial family reference, and confirm that the vehicle is equipped with a factory headlight washer system. Use the removed part and product photographs to check whether the bumper is standard or sport specification, confirm the destination-market equipment specification, and check the production date where model-year transitions overlap; finally, compare the actuator orientation behind the bumper cover and review painted, primed and unpainted finish requirements.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-022 should be checked separately. For this headlight washer nozzle cover, check the joint between the visible cap and hidden support, review the hose spigot angle on the washer nozzle, and compare the cap-to-support engagement method. A direct comparison with the removed part should additionally inspect the rear reinforcement ribs, check each molded locator against the original component, and review any paint-preparation requirement before fitting. Before the item is accepted, compare the outer surface profile with the bumper opening and inspect narrow plastic tips before installation.
OE Identification and Side Confirmation
76881-TOA-S01 is the primary OE identity for this right front right headlight washer nozzle cover, while HD02010-022 is the internal item code. Match both references to the vehicle record, then check the washer jet position relative to the headlamp lens. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-022 begins before the bumper area is disturbed: inspect the bumper opening after the trial fit and route the washer hose away from sharp edges. During trial fitting, keep dirt out of open washer-fluid lines, photograph the original routing before disassembly, and align the cover flush with the bumper surface. Before returning the vehicle to service, follow the vehicle workshop procedure for bumper removal, check the headlamp lens receives an even spray, and trial-fit the component before final fastening.
Receiving Inspection
When HD02010-022 arrives, receiving staff should confirm the bumper-facing edge has not been compressed in transit, review the hose spigot for impact damage or distortion, and confirm the internal item code before mixed stock is shelved. Before workshop release, photograph the received item if the vehicle fitment is still pending, compare left and right orientation before removing protective wrapping, check the carton partition for evidence of part-to-part contact, and retain the OE label until the washer system has passed its function test. Complete the inspection by ensuring that staff verify the cover contour against the approved product photograph, document any shortage before the receiving inspection is closed, and separate mirrored components immediately after carton opening.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76881-TOA-S01 |
| Cross-reference numbers | 76881-TOA-S01 76881TOAS01 |
| Internal item code | HD02010-022 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2012 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA CR-V 2012 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76881-TOA-S01, please confirm whether the visible cover needs a primed or finished surface, confirm pallet requirements for larger quantities, and confirm whether the visible cover needs a primed or finished surface. Packing instructions should confirm pallet requirements for larger quantities, confirm whether the visible cover needs a primed or finished surface, and confirm pallet requirements for larger quantities. Before dispatch, confirm whether the visible cover needs a primed or finished surface and confirm pallet requirements for larger quantities.
Frequently Asked Questions
Is a sample order available for 76881-TOA-S01?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For item HD02010-022, the approval should protect each nozzle outlet from dust during transit. The same item record should also provide the complete destination address or port.
Why must left and right versions of 76881-TOA-S01 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. On the listed HONDA CR-V 2012, technicians should inspect the base bracket around every locating slot. A workshop comparison should additionally inspect the base bracket around every locating slot.
Should the washer system be tested after fitting 76881-TOA-S01?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For the right-side order line, transfer reusable clips only after checking their condition. The order review should further verify that the cover closes without rubbing the bumper.
What information should accompany a 76881-TOA-S01 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. The product-specific check for 76881-TOA-S01 should state the requested delivery schedule. Receiving staff should also provide the complete destination address or port.
Does the finish specification matter for 76881-TOA-S01?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle cover is accepted, check the complete supplied scope against the photographs. Before approval, the buyer or technician should check the cap hinge or retaining point.
