76881-TA1-M02 Front Right Headlight Washer Nozzle Cover for HONDA Accord 2011
Primary OE reference: 76881-TA1-M02
Cross-reference number 1: 76881-TA1-M02
Cross-reference number 2: 76881TA1M02
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: HONDA Accord 2011
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: Accord
Model year: 2011
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-008
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76881-TA1-M02 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 76881-TA1-M02 is a front right headlight washer nozzle cover intended for HONDA Accord 2011. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Accord
Compatibility for 76881-TA1-M02 should be confirmed against HONDA Accord 2011 and the right installation side. The review should inspect the bumper cutout shape and surrounding contour, compare the nozzle travel direction with the vehicle-side installation, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to review body-style differences within the same model generation, check the washer jet position relative to the headlamp lens, and compare the complete OE marking with the removed washer component; finally, verify the required left or right installation side and compare the washer opening beside the correct headlamp.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-008 should be checked separately. For this headlight washer nozzle cover, compare the support flange width, inspect the hose connector for ovality, and check the cap hinge or retaining point. A direct comparison with the removed part should additionally review the spring-loaded return features where fitted, compare the distance between mounting points, and inspect the actuator barrel for impact damage. Before the item is accepted, check the complete supplied scope against the photographs and review the clip geometry on the rear face.
OE Identification and Side Confirmation
76881-TA1-M02 is the primary OE identity for this right front right headlight washer nozzle cover, while HD02010-008 is the internal item code. Match both references to the vehicle record, then confirm the destination-market equipment specification. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-008 begins before the bumper area is disturbed: check the headlamp lens receives an even spray and trial-fit the component before final fastening. During trial fitting, tighten bracket hardware only after alignment, test for drips after the washer pump stops, and transfer reusable clips only after checking their condition. Before returning the vehicle to service, verify that the cap remains attached through a full washer cycle, verify that the cover closes without rubbing the bumper, and disconnect the fluid hose without twisting the plastic spigot.
Receiving Inspection
When HD02010-008 arrives, receiving staff should compare connector depth and hose angle with the retained original part, check molded tabs for whitening, cracks or transport stress, and review the production finish against the approved sample. Before workshop release, inspect mounting holes for flash, blockage or edge damage, confirm the nozzle outlet is clean and unobstructed, measure the main mounting span when two bumper versions appear similar, and confirm the bumper-facing edge has not been compressed in transit. Complete the inspection by ensuring that staff review the hose spigot for impact damage or distortion, confirm the internal item code before mixed stock is shelved, and photograph the received item if the vehicle fitment is still pending.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76881-TA1-M02 |
| Cross-reference numbers | 76881-TA1-M02 76881TA1M02 |
| Internal item code | HD02010-008 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA Accord 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76881-TA1-M02, please include the full OE reference on the purchase order, provide the consignee and freight-forwarder details, and include the full OE reference on the purchase order. Packing instructions should provide the consignee and freight-forwarder details, include the full OE reference on the purchase order, and provide the consignee and freight-forwarder details. Before dispatch, include the full OE reference on the purchase order and provide the consignee and freight-forwarder details.
Frequently Asked Questions
Should the washer system be tested after fitting 76881-TA1-M02?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For item HD02010-008, the approval should verify that the cover closes without rubbing the bumper. The same item record should also check that the washer unit is fully seated in its guide.
What information should accompany a 76881-TA1-M02 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed HONDA Accord 2011, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally verify the packed quantity by OE reference.
Why must left and right versions of 76881-TA1-M02 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For the right-side order line, check the joint between the visible cap and hidden support. The order review should further compare the support flange width.
How should 76881-TA1-M02 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. The product-specific check for 76881-TA1-M02 should match the mounting pattern around the bumper aperture. Receiving staff should also use the full OE number, not a partial family reference.
Which side uses 76881-TA1-M02?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. Before this headlight washer nozzle cover is accepted, compare the distance between mounting points. Before approval, the buyer or technician should check the joint between the visible cap and hidden support.
