76880-TL0-S01 Front Right Headlight Washer Nozzle for HONDA Spirior 2009
Primary OE reference: 76880-TL0-S01
Cross-reference number 1: 76880-TL0-S01
Cross-reference number 2: 76880TL0S01
Product type: Front Right Headlight Washer Nozzle
Vehicle application: HONDA Spirior 2009
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: Spirior
Model year: 2009
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: HD02010-014
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76880-TL0-S01 Front Right Headlight Washer Nozzle Product Overview
The component shown under 76880-TL0-S01 is a front right headlight washer nozzle intended for HONDA Spirior 2009. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Spirior
Compatibility for 76880-TL0-S01 should be confirmed against HONDA Spirior 2009 and the right installation side. The review should check regional variations in headlamp-cleaning equipment, check whether the bumper is standard or sport specification, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to match the mounting pattern around the bumper aperture, compare product photographs with the removed part from several angles, and confirm whether a cap, nozzle, bracket or complete assembly is required; finally, separate mirrored left and right items during inventory selection and review painted, primed and unpainted finish requirements.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of HD02010-014 should be checked separately. For this headlight washer nozzle, compare the cap perimeter and corner radii, inspect the rear reinforcement ribs, and check the nozzle outlet orientation. A direct comparison with the removed part should additionally review any paint-preparation requirement before fitting, compare the support flange width, and inspect narrow plastic tips before installation. Before the item is accepted, check the cap hinge or retaining point and review the bracket stiffness and screw seats.
OE Identification and Side Confirmation
76880-TL0-S01 is the primary OE identity for this right front right headlight washer nozzle, while HD02010-014 is the internal item code. Match both references to the vehicle record, then retain the removed component for a direct physical comparison. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-014 begins before the bumper area is disturbed: reconfirm the OE number before discarding the packaging and disconnect the fluid hose without twisting the plastic spigot. During trial fitting, align the cover flush with the bumper surface, check the system for leaks after reconnection, and clean the hose and connector before assembly. Before returning the vehicle to service, verify that the cap remains attached through a full washer cycle, keep dirt out of open washer-fluid lines, and paint or finish visible covers before final installation when required.
Receiving Inspection
When HD02010-014 arrives, receiving staff should check the cap hinge or retaining point for free movement, verify the nozzle head returns smoothly without applying excess force, and check the spring-return area where the component includes an actuator. Before workshop release, separate mirrored components immediately after carton opening, document any shortage before the receiving inspection is closed, verify the cover contour against the approved product photograph, and retain the OE label until the washer system has passed its function test. Complete the inspection by ensuring that staff check the carton partition for evidence of part-to-part contact, compare left and right orientation before removing protective wrapping, and photograph the received item if the vehicle fitment is still pending.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 76880-TL0-S01 |
| Cross-reference numbers | 76880-TL0-S01 76880TL0S01 |
| Internal item code | HD02010-014 |
| Vehicle brand | HONDA |
| Vehicle model | Spirior |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA Spirior 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76880-TL0-S01, please protect hose spigots and projecting tabs, request barcode or private-label details when needed, and state the requested delivery schedule. Packing instructions should request replacement-part documentation when required, include the full OE reference on the purchase order, and confirm sample requirements before a bulk order. Before dispatch, check carton labels at receiving and separate fragile actuator bodies from heavier metal parts.
Frequently Asked Questions
Are clips, hoses or fasteners supplied with 76880-TL0-S01?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For item HD02010-014, the approval should request moisture protection for sea freight. The same item record should also confirm the preferred incoterm.
Is 76880-TL0-S01 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. On the listed HONDA Spirior 2009, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally list model years and bumper versions for mixed orders.
How should 76880-TL0-S01 be packed for export?
The front right headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the right-side order line, provide the complete destination address or port. The order review should further use dividers to prevent caps from rubbing each other.
Should the washer system be tested after fitting 76880-TL0-S01?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 76880-TL0-S01 should test for drips after the washer pump stops. Receiving staff should also replace distorted clips or damaged seals.
Why must left and right versions of 76880-TL0-S01 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. Before this headlight washer nozzle is accepted, compare the cap-to-support engagement method. Before approval, the buyer or technician should check the joint between the visible cap and hidden support.
