76250-TB0-H01 Left Exterior Side Mirror Assembly for HONDA Accord 2008
Primary OE reference: 76250-TB0-H01
Cross-reference 1: 76250-TB0-H01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA Accord 2008
Installation position: Left exterior mirror position
Brand: HONDA
Model: Accord
Vehicle year: 2008
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Re-establishes the door-mounted mirror position for the stated production year and model before trim and wiring are reassembled.
Mounting comparison: Review the signal-lamp opening against a retained original sample so electrical functions remain compatible.
Electrical review: Trace the folding mechanism at parts-receiving inspection to identify missing or damaged wiring early.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately.
Receiving priority: Protect the mirror glass against the approved reference to prevent scratches during handling.
Handling note: Document the painted or unpainted cover before electrical testing begins to identify transit damage.
Wholesale enquiry: List left and right quantities separately when a mixed-side distributor order is requested.
Order preparation: Submit the requested quantity for every purchase line to make repeat ordering more reliable.
Internal item code: HD02014-003
76250-TB0-H01 Exterior Side Mirror Assembly Product Overview
76250-TB0-H01 identifies an exterior side mirror assembly for the left exterior mirror position on HONDA Accord 2008. Supports the model-shaped mirror footprint after collision, housing or glass damage so workshop planning starts with the correct part. The page records HD02014-003 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Recovers the door-mounted mirror position when the original mirror can no longer be reused without mixing visually similar door mirrors. Recovers the factory-style exterior observation point after collision, housing or glass damage without mixing visually similar door mirrors. Restores the outside viewing surface and housing with the left or right position clearly separated while preserving the listed fitment identity. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Cross-check the triangular mounting base against a retained original sample so the original fasteners align correctly. Compare the complete OE label with the existing harness accessible before the door trim is disturbed. Confirm the glass outline and housing profile against the removed mirror to avoid a trim-level mismatch. Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Electrical and Housing Checks
Protect the vehicle-side mirror connector before energising a replacement assembly so manual and electrical variants stay separated. Compare the requested functional scope while the original unit is still available before final fitment approval. Inspect the folding mechanism before energising a replacement assembly to avoid damaging vehicle-side terminals. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76250-TB0-H01 |
| Cross-reference numbers | 76250-TB0-H01 |
| Internal item code | HD02014-003 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2008 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Examine the mounting studs during sample approval before a distorted base is fitted. Check the housing shell without placing weight on the glass before a distorted base is fitted. Inspect the mirror glass during sample approval to protect the visible exterior surface. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Reference the connector-side photograph with the target delivery timing to support accurate packing. Reference the sample or bulk-order requirement when mixed-model stock is required so left-right quantities remain correct. Specify the adjustment and lamp requirements when mixed-model stock is required before electrical variants are quoted. Include HD02014-003 on repeat orders so the requested application remains traceable.
Frequently Asked Questions
What should be checked when 76250-TB0-H01 arrives?
Inspect the mirror adjustment plate before paint preparation to protect the visible exterior surface. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76250-TB0-H01?
Attach a connector photo if powered functions or lamp equipment must match the vehicle harness. Connector and rear-mount photographs help separate close variants.
What is supplied with 76250-TB0-H01?
Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 76250-TB0-H01 listed for?
The recorded application is HONDA Accord 2008. Production date, trim equipment and connector details still require physical verification.
Can 76250-TB0-H01 fit every Accord model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
