76250-SWA-H41 Left Exterior Side Mirror Assembly for HONDA CR-V 2007
Primary OE reference: 76250-SWA-H41
Cross-reference 1: 76250-SWA-H41
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA CR-V 2007
Installation position: Left exterior mirror position
Brand: HONDA
Model: CR-V
Vehicle year: 2007
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Preserves the door-mounted mirror position after collision, housing or glass damage so workshop planning starts with the correct part.
Mounting comparison: Identify the production-date application with the vehicle year identified to distinguish manual and powered applications.
Electrical review: Test the turn-signal wiring with the ignition and battery procedure observed so lamp and adjustment requirements are clear.
Fitment confirmation: Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins.
Supplied component scope: For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references.
Receiving priority: Check the housing shell with transit packaging retained to keep the correct SKU traceable.
Handling note: Isolate the folding pivot after unpacking but before installation to protect the visible exterior surface.
Wholesale enquiry: Supply the VIN or production date when the stated model year crosses a design change.
Order preparation: Reference the destination country with the export quotation request so left-right quantities remain correct.
Internal item code: HD02014-027
76250-SWA-H41 Exterior Side Mirror Assembly Product Overview
76250-SWA-H41 identifies an exterior side mirror assembly for the left exterior mirror position on HONDA CR-V 2007. Reconstructs the outside viewing surface and housing without treating a similar housing as universal before paint or finishing work is scheduled. The page records HD02014-027 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Supports the mirror base and visible rearward field for the stated production year and model to match the vehicle-specific housing outline. Completes the intended viewing angle beside the cabin when the original mirror can no longer be reused to support safe rearward observation. Recovers the driver-side rearward viewing point for repair stock tied to the listed OE reference to match the vehicle-specific housing outline. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Record the folding joint and base angle against the removed mirror to prevent an incorrect housing selection. Measure the door-side bolt pattern at the exact door position to avoid a trim-level mismatch. Inspect the signal-lamp opening before reusable trim is transferred to distinguish manual and powered applications. A connector-side photograph and the retained mirror provide the strongest comparison for this application.
Electrical and Housing Checks
Separate the harness exit direction during bench comparison to keep function expectations documented. Confirm the plug keying and latch before optional functions are promised so the supplied scope matches the enquiry. Compare the folding mechanism with each purchase line kept separate before the workshop schedules installation. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76250-SWA-H41 |
| Cross-reference numbers | 76250-SWA-H41 |
| Internal item code | HD02014-027 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2007 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the signal lens against the approved reference so every received unit can be accounted for. Check the mirror adjustment plate on a clean padded surface so connector damage is isolated early. Document the mirror glass at warehouse receiving so cracked glass is found immediately. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Confirm the requested quantity when left and right units are combined to support an accurate B2B quotation. Provide the vehicle model and year on the wholesale enquiry to make repeat ordering more reliable. Confirm the vehicle model and year when mixed-model stock is required to reduce warehouse picking errors. Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Frequently Asked Questions
Can 76250-SWA-H41 fit every CR-V model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 76250-SWA-H41 be handled during installation?
Review the triangular mounting base without placing weight on the glass before the repair schedule is affected. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 76250-SWA-H41 a left or right side mirror?
76250-SWA-H41 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 76250-SWA-H41 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Should 76250-SWA-H41 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
