76250-SEN-H01 Right Exterior Side Mirror Assembly for HONDA Fit 2004
Primary OE reference: 76250-SEN-H01
Cross-reference 1: 76250-SEN-H01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA Fit 2004
Installation position: Right exterior mirror position
Brand: HONDA
Model: Fit
Vehicle year: 2004
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Restores the intended viewing angle beside the cabin at the recorded door or auxiliary mounting point to match the vehicle-specific housing outline.
Mounting comparison: Record the cover contour and lower edge before body-color work begins so the base seats without distortion.
Electrical review: Separate the vehicle-side mirror connector using the application notes and physical sample before the workshop schedules installation.
Fitment confirmation: Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Supplied component scope: The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Receiving priority: Confirm the signal lens without placing weight on the glass before a distorted base is fitted.
Handling note: Check the housing shell after unpacking but before installation to keep the correct SKU traceable.
Wholesale enquiry: Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Order preparation: Provide the connector-side photograph before sample approval to support an accurate B2B quotation.
Internal item code: HD02014-015
76250-SEN-H01 Exterior Side Mirror Assembly Product Overview
76250-SEN-H01 identifies an exterior side mirror assembly for the right exterior mirror position on HONDA Fit 2004. Completes the passenger-side exterior sightline for repair stock tied to the listed OE reference to match the vehicle-specific housing outline. The page records HD02014-015 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Completes the factory-style exterior observation point after collision, housing or glass damage while maintaining the intended exterior appearance. Re-establishes the roadside awareness point beside the front door for an exterior-body repair quotation while maintaining the intended exterior appearance. Re-establishes the model-shaped mirror footprint for an exterior-body repair quotation to reduce incorrect left-right ordering. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Align the folding joint and base angle with the existing harness accessible before the door trim is disturbed. Verify the glass outline and housing profile against the removed mirror so electrical functions remain compatible. Verify the wiring lead and plug position using clear rear and connector photographs before the door trim is disturbed. Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Electrical and Housing Checks
Document the plug keying and latch with each purchase line kept separate to keep function expectations documented. Separate the reusable electrical hardware with each purchase line kept separate before a powered mirror is operated. Confirm the plug keying and latch at parts-receiving inspection before a powered mirror is operated. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76250-SEN-H01 |
| Cross-reference numbers | 76250-SEN-H01 |
| Internal item code | HD02014-015 |
| Vehicle brand | HONDA |
| Vehicle model | Fit |
| Model year | 2004 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Support the connector terminals after unpacking but before installation to keep the correct SKU traceable. Document the connector terminals during sample approval before the part is accepted into inventory. Isolate the mounting studs during sample approval to prevent scratches during handling. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Separate the sample or bulk-order requirement before freight options are compared to support an accurate B2B quotation. Identify the destination country with the target delivery timing before a commercial invoice is prepared. Specify the vehicle model and year with the target delivery timing to make repeat ordering more reliable. Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Frequently Asked Questions
Should 76250-SEN-H01 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 76250-SEN-H01 fitment be confirmed?
Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 76250-SEN-H01 arrives?
Examine the edge seals and clips during sample approval to prevent scratches during handling. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76250-SEN-H01?
Confirm the destination country and preferred transport method before export pricing is prepared. Connector and rear-mount photographs help separate close variants.
What is supplied with 76250-SEN-H01?
Painted appearance in a photograph does not replace verification of the required housing and electrical content. Use the product photographs and written quotation to confirm the final sales scope.
