76250-SDA-H31 Left Exterior Side Mirror Assembly for HONDA Accord 2003
Primary OE reference: 76250-SDA-H31
Cross-reference 1: 76250-SDA-H31
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA Accord 2003
Installation position: Left exterior mirror position
Brand: HONDA
Model: Accord
Vehicle year: 2003
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Restores the driver-side rearward viewing point with the left or right position clearly separated so the mirror can be compared against the removed unit.
Mounting comparison: Measure the door-side bolt pattern from the inner mounting face so the original fasteners align correctly.
Electrical review: Trace the adjustment control type with the ignition and battery procedure observed before final fitment approval.
Fitment confirmation: Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins.
Supplied component scope: The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Receiving priority: Examine the housing shell during sample approval to keep the correct SKU traceable.
Handling note: Assess the folding pivot before electrical testing begins to identify transit damage.
Wholesale enquiry: List left and right quantities separately when a mixed-side distributor order is requested.
Order preparation: Specify the sample or bulk-order requirement on repeat distributor orders to keep the OE identity traceable.
Internal item code: HD02014-001
76250-SDA-H31 Exterior Side Mirror Assembly Product Overview
76250-SDA-H31 identifies an exterior side mirror assembly for the left exterior mirror position on HONDA Accord 2003. Renews the roadside awareness point beside the front door after the removed part has been identified to reduce incorrect left-right ordering. The page records HD02014-001 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Replaces the intended viewing angle beside the cabin with the left or right position clearly separated while keeping the OE purchase reference traceable. Reconstructs the passenger-side exterior sightline for the stated production year and model to match the vehicle-specific housing outline. Completes the vehicle’s original rearward observation area for the stated production year and model before trim and wiring are reassembled. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Photograph the folding joint and base angle during incoming-part comparison to prevent an incorrect housing selection. Confirm the production-date application using the VIN when year boundaries overlap to distinguish manual and powered applications. Verify the folding joint and base angle using clear rear and connector photographs before paint and assembly labour are committed. Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins.
Electrical and Housing Checks
Trace the folding mechanism before the inner door panel is refitted so manual and electrical variants stay separated. Review the manual control cable before the old mirror is disconnected so lamp and adjustment requirements are clear. Inspect the lamp lens and terminals using the application notes and physical sample to avoid damaging vehicle-side terminals. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76250-SDA-H31 |
| Cross-reference numbers | 76250-SDA-H31 |
| Internal item code | HD02014-001 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2003 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Handle the mirror adjustment plate under neutral receiving light to protect the visible exterior surface. Inspect the mirror adjustment plate during sample approval before the repair schedule is affected. Compare the carton-supported corners on a clean padded surface to keep the correct SKU traceable. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Separate the adjustment and lamp requirements together with consignee details so similar mirror housings remain separated. Record the internal item code together with consignee details so the supplied component scope is clear. Attach the sample or bulk-order requirement for every purchase line so left-right quantities remain correct. Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation.
Frequently Asked Questions
How should 76250-SDA-H31 fitment be confirmed?
Verify production year, trim equipment and left-right orientation because similar housings can use different wiring. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 76250-SDA-H31 arrives?
Compare the folding pivot before the component enters workshop stock to identify transit damage. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76250-SDA-H31?
Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation. Connector and rear-mount photographs help separate close variants.
What is supplied with 76250-SDA-H31?
Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 76250-SDA-H31 listed for?
The recorded application is HONDA Accord 2003. Production date, trim equipment and connector details still require physical verification.
