76208-TR0-H01 Right Exterior Side Mirror Assembly for HONDA Civic 2012
Primary OE reference: 76208-TR0-H01
Cross-reference 1: 76208-TR0-H01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA Civic 2012
Installation position: Right exterior mirror position
Brand: HONDA
Model: Civic
Vehicle year: 2012
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Supports the exterior mirror mounting envelope at the recorded door or auxiliary mounting point so workshop planning starts with the correct part.
Mounting comparison: Inspect the wiring lead and plug position at the exact door position to separate facelift variations.
Electrical review: Document the adjustment control type before the inner door panel is refitted so manual and electrical variants stay separated.
Fitment confirmation: Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Supplied component scope: Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count.
Receiving priority: Support the mirror glass against the approved reference to prevent scratches during handling.
Handling note: Document the painted or unpainted cover after unpacking but before installation so left and right mirrors remain separated.
Wholesale enquiry: Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Order preparation: Identify the required mirror side with the target delivery timing so lead time can be reviewed correctly.
Internal item code: HD02014-012
76208-TR0-H01 Exterior Side Mirror Assembly Product Overview
76208-TR0-H01 identifies an exterior side mirror assembly for the right exterior mirror position on HONDA Civic 2012. Returns the factory-style exterior observation point with the left or right position clearly separated so the mirror can be compared against the removed unit. The page records HD02014-012 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Reconstructs the intended viewing angle beside the cabin within the application-specific door geometry before trim and wiring are reassembled. Supports the passenger-side exterior sightline within the application-specific door geometry to match the vehicle-specific housing outline. Provides the vehicle’s original rearward observation area with the left or right position clearly separated to support safe rearward observation. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Record the wiring lead and plug position before the order is approved so the original fasteners align correctly. Review the cover contour and lower edge against a retained original sample to confirm the supplied mirror side. Photograph the glass outline and housing profile during incoming-part comparison so the original fasteners align correctly. Use 76208-TR0-H01 as the purchasing reference, then compare the right exterior mirror position with the removed component.
Electrical and Housing Checks
Trace the mirror-heating circuit before the inner door panel is refitted so lamp and adjustment requirements are clear. Identify the lamp lens and terminals before the old mirror is disconnected so lamp and adjustment requirements are clear. Verify the turn-signal wiring with the ignition and battery procedure observed to identify missing or damaged wiring early. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76208-TR0-H01 |
| Cross-reference numbers | 76208-TR0-H01 |
| Internal item code | HD02014-012 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | 2012 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Protect the signal lens before the component enters workshop stock so every received unit can be accounted for. Assess the purchase-line label at warehouse receiving before a distorted base is fitted. Handle the connector terminals on a clean padded surface before any finishing work starts. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Reference the required mirror side before carton planning so similar mirror housings remain separated. Confirm the complete OE reference for every purchase line so left-right quantities remain correct. Submit the vehicle model and year with the target delivery timing to make repeat ordering more reliable. List left and right quantities separately when a mixed-side distributor order is requested.
Frequently Asked Questions
How should 76208-TR0-H01 fitment be confirmed?
Use the VIN when a model-year change may alter the base, harness or lamp arrangement. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 76208-TR0-H01 arrives?
Assess the mirror glass without placing weight on the glass before the repair schedule is affected. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76208-TR0-H01?
Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation. Connector and rear-mount photographs help separate close variants.
What is supplied with 76208-TR0-H01?
The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 76208-TR0-H01 listed for?
The recorded application is HONDA Civic 2012. Production date, trim equipment and connector details still require physical verification.
