76200-TB0-H01 Right Exterior Side Mirror Assembly for HONDA Accord 2008
Primary OE reference: 76200-TB0-H01
Cross-reference 1: 76200-TB0-H01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA Accord 2008
Installation position: Right exterior mirror position
Brand: HONDA
Model: Accord
Vehicle year: 2008
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Maintains the exterior mirror mounting envelope when the original mirror can no longer be reused before trim and wiring are reassembled.
Mounting comparison: Identify the left-right orientation using the VIN when year boundaries overlap to prevent an incorrect housing selection.
Electrical review: Document the folding mechanism with each purchase line kept separate to prevent a connector mismatch.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: The images define the supplied housing, glass and visible hardware, while vehicle-side wiring remains on the vehicle.
Receiving priority: Assess the mounting studs before electrical testing begins so every received unit can be accounted for.
Handling note: Protect the carton-supported corners before the component enters workshop stock to protect the visible exterior surface.
Wholesale enquiry: Record the complete OE number on every purchase line to avoid mixing similar exterior mirrors.
Order preparation: Reference the requested packaging mark before carton planning so lead time can be reviewed correctly.
Internal item code: HD02014-004
76200-TB0-H01 Exterior Side Mirror Assembly Product Overview
76200-TB0-H01 identifies an exterior side mirror assembly for the right exterior mirror position on HONDA Accord 2008. Preserves the passenger-side exterior sightline when the original mirror can no longer be reused while preserving the listed fitment identity. The page records HD02014-004 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Replaces the roadside awareness point beside the front door without treating a similar housing as universal while keeping the OE purchase reference traceable. Recovers the door-mounted mirror position after collision, housing or glass damage while maintaining the intended exterior appearance. Reconstructs the factory-style exterior observation point for an exterior-body repair quotation before trim and wiring are reassembled. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Compare the manual cable or electrical controls with the vehicle year identified to confirm the supplied mirror side. Photograph the triangular mounting base against the removed mirror to distinguish manual and powered applications. Photograph the cover contour and lower edge during incoming-part comparison so the original fasteners align correctly. Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Electrical and Housing Checks
Identify the vehicle-side mirror connector with each purchase line kept separate before reusable parts are transferred. Identify the turn-signal wiring after transit restraints are removed to keep function expectations documented. Inspect the folding mechanism with each purchase line kept separate to keep function expectations documented. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76200-TB0-H01 |
| Cross-reference numbers | 76200-TB0-H01 |
| Internal item code | HD02014-004 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2008 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Handle the signal lens against the approved reference so left and right mirrors remain separated. Inspect the housing shell at warehouse receiving to protect the visible exterior surface. Assess the mirror glass with transit packaging retained so left and right mirrors remain separated. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Confirm the required mirror side before sample approval so the supplied component scope is clear. Submit the complete OE reference for every purchase line before a commercial invoice is prepared. Separate the requested packaging mark on the wholesale enquiry to keep the OE identity traceable. List left and right quantities separately when a mixed-side distributor order is requested.
Frequently Asked Questions
Can 76200-TB0-H01 fit every Accord model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 76200-TB0-H01 be handled during installation?
Inspect the signal lens before electrical testing begins so connector damage is isolated early. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 76200-TB0-H01 a left or right side mirror?
76200-TB0-H01 is recorded for the right exterior mirror position. Compare the mounting base orientation with the removed part.
Does 76200-TB0-H01 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count.
Should 76200-TB0-H01 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
