76200-SWA-H41 Right Exterior Side Mirror Assembly for HONDA CR-V 2007
Primary OE reference: 76200-SWA-H41
Cross-reference 1: 76200-SWA-H41
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA CR-V 2007
Installation position: Right exterior mirror position
Brand: HONDA
Model: CR-V
Vehicle year: 2007
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Reconstructs the mirror base and visible rearward field during a side-mirror replacement project to support safe rearward observation.
Mounting comparison: Review the cover contour and lower edge at the exact door position to separate facelift variations.
Electrical review: Inspect the reusable electrical hardware before optional functions are promised so manual and electrical variants stay separated.
Fitment confirmation: A connector-side photograph and the retained mirror provide the strongest comparison for this application.
Supplied component scope: Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Receiving priority: Handle the housing shell at warehouse receiving to keep the correct SKU traceable.
Handling note: Confirm the folding pivot after unpacking but before installation to prevent scratches during handling.
Wholesale enquiry: Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation.
Order preparation: Confirm the vehicle model and year before production scheduling to keep the OE identity traceable.
Internal item code: HD02014-028
76200-SWA-H41 Exterior Side Mirror Assembly Product Overview
76200-SWA-H41 identifies an exterior side mirror assembly for the right exterior mirror position on HONDA CR-V 2007. Completes the outside viewing surface and housing after the removed part has been identified so workshop planning starts with the correct part. The page records HD02014-028 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Reconstructs the side-specific mirror assembly location after the removed part has been identified to support safe rearward observation. Supports the side-specific mirror assembly location for an exterior-body repair quotation without mixing visually similar door mirrors. Replaces the model-shaped mirror footprint inside the vehicle’s original attachment layout so workshop planning starts with the correct part. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Match the signal-lamp opening during incoming-part comparison so the base seats without distortion. Verify the folding joint and base angle during incoming-part comparison so the plug does not require modification. Match the left-right orientation using clear rear and connector photographs to avoid a trim-level mismatch. Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Electrical and Housing Checks
Test the plug keying and latch before energising a replacement assembly so unsupported functions are not claimed. Compare the vehicle-side mirror connector after transit restraints are removed to keep function expectations documented. Confirm the folding mechanism while the original unit is still available before final fitment approval. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76200-SWA-H41 |
| Cross-reference numbers | 76200-SWA-H41 |
| Internal item code | HD02014-028 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2007 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Document the signal lens against the approved reference before the repair schedule is affected. Document the mirror glass after unpacking but before installation to prevent scratches during handling. Assess the connector terminals before electrical testing begins to keep the correct SKU traceable. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Reference the connector-side photograph on the wholesale enquiry so the supplied component scope is clear. List the adjustment and lamp requirements together with consignee details to support accurate packing. Submit the original-mirror photograph together with consignee details to reduce warehouse picking errors. Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Frequently Asked Questions
How should 76200-SWA-H41 fitment be confirmed?
A connector-side photograph and the retained mirror provide the strongest comparison for this application. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 76200-SWA-H41 arrives?
Inspect the mirror adjustment plate before the component enters workshop stock so cracked glass is found immediately. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76200-SWA-H41?
Attach a connector photo if powered functions or lamp equipment must match the vehicle harness. Connector and rear-mount photographs help separate close variants.
What is supplied with 76200-SWA-H41?
Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 76200-SWA-H41 listed for?
The recorded application is HONDA CR-V 2007. Production date, trim equipment and connector details still require physical verification.
