76200-SAA-A01 Right Exterior Side Mirror Assembly for HONDA Fit 2004
Primary OE reference: 76200-SAA-A01
Cross-reference 1: 76200-SAA-A01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA Fit 2004
Installation position: Right exterior mirror position
Brand: HONDA
Model: Fit
Vehicle year: 2004
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Recovers the side-specific mirror assembly location with the left or right position clearly separated before trim and wiring are reassembled.
Mounting comparison: Identify the wiring lead and plug position against a retained original sample to confirm the supplied mirror side.
Electrical review: Review the mirror-heating circuit before energising a replacement assembly to prevent a connector mismatch.
Fitment confirmation: Use 76200-SAA-A01 as the purchasing reference, then compare the right exterior mirror position with the removed component.
Supplied component scope: Confirm adjustment, lamp and folding requirements in writing when those functions are essential to the repair.
Receiving priority: Inspect the folding pivot before the component enters workshop stock to prevent scratches during handling.
Handling note: Compare the signal lens with transit packaging retained before a distorted base is fitted.
Wholesale enquiry: Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Order preparation: Confirm the requested quantity on repeat distributor orders so the supplied component scope is clear.
Internal item code: HD02014-013
76200-SAA-A01 Exterior Side Mirror Assembly Product Overview
76200-SAA-A01 identifies an exterior side mirror assembly for the right exterior mirror position on HONDA Fit 2004. Replaces the mirror base and visible rearward field at the recorded door or auxiliary mounting point to support safe rearward observation. The page records HD02014-013 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Restores the roadside awareness point beside the front door after the removed part has been identified so the correct side remains easy to verify. Preserves the door-mounted mirror position with the left or right position clearly separated while preserving the listed fitment identity. Provides the mirror base and visible rearward field for the stated production year and model without mixing visually similar door mirrors. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Compare the manual cable or electrical controls against the removed mirror to distinguish manual and powered applications. Photograph the wiring lead and plug position before reusable trim is transferred to separate facelift variations. Confirm the door-side bolt pattern with the existing harness accessible to separate facelift variations. Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Electrical and Housing Checks
Identify the requested functional scope while the original unit is still available before a powered mirror is operated. Check the vehicle-side mirror connector during bench comparison before final fitment approval. Separate the turn-signal wiring with each purchase line kept separate so lamp and adjustment requirements are clear. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76200-SAA-A01 |
| Cross-reference numbers | 76200-SAA-A01 |
| Internal item code | HD02014-013 |
| Vehicle brand | HONDA |
| Vehicle model | Fit |
| Model year | 2004 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Examine the purchase-line label during sample approval to protect the visible exterior surface. Review the signal lens without placing weight on the glass to keep the correct SKU traceable. Document the mounting studs against the approved reference to protect the visible exterior surface. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Record the complete OE reference on the wholesale enquiry to reduce warehouse picking errors. Record the adjustment and lamp requirements before sample approval to reduce warehouse picking errors. Separate the sample or bulk-order requirement on repeat distributor orders to make repeat ordering more reliable. Identify body-colour finishing needs separately from the mechanical and electrical mirror specification.
Frequently Asked Questions
How should 76200-SAA-A01 fitment be confirmed?
Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 76200-SAA-A01 arrives?
Review the mirror adjustment plate with transit packaging retained before any finishing work starts. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76200-SAA-A01?
Include HD02014-013 on repeat orders so the requested application remains traceable. Connector and rear-mount photographs help separate close variants.
What is supplied with 76200-SAA-A01?
For mixed orders, keep left and right assemblies on separate purchase lines with their own OE references. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 76200-SAA-A01 listed for?
The recorded application is HONDA Fit 2004. Production date, trim equipment and connector details still require physical verification.
