75313-TLC-A01 Rear Right Door Lower Molding for 2017-2022 Honda CR-V
Primary OE reference: 75313-TLC-A01
Cross-reference 1: 75313-TLC-A01
Product type: Rear Right Door Lower Molding
Applicable vehicle: 2017-2022 HONDA CR-V
Installation position: Rear right door, lower exterior edge
Brand: HONDA
Model: CR-V
Vehicle year: 2017-2022
Component scope: Passenger-side rear lower-door molding for 2017-2022 CR-V bodywork.
Design cue: Deeply sculpted panel with a rising rear corner and horizontal surface ribs.
Contour comparison: Match the broad face, rear sweep and lower edge to the removed rear-door trim.
Attachment review: Confirm every hidden tab and clip seat aligns with the rear door structure.
Version check: Compare trim level, texture and exterior appearance before approving the part.
Installation preparation: Inspect the door edge and dry-fit the sculpted panel without stressing its rear rise.
Receiving inspection: Check the ribbed face, corners and reverse mounting rail for transport damage.
Order information: Reference 75313-TLC-A01, SKU HD02034-009, rear-right location and volume.
Sculpted Rear Door Garnish
75313-TLC-A01 is a right rear lower-door molding for 2017-2022 Honda CR-V vehicles. The part has a deeper sculpted face than earlier flat strips and forms a pronounced transition near the rear wheel opening.
Surface Ribs and Rear Sweep
Horizontal ribs, a broad centre section and an upward trailing corner define this design. These features should be compared with the vehicle’s remaining side trim to maintain consistent styling across the lower body.
Generation and Trim-Level Check
Verify the OE reference, model year range and passenger-rear position. Equipment grades can use visually similar panels, so surface texture and detailed back-side geometry should also be reviewed.
Automotive Replacement Part Specifications
| Product type | Rear Right Door Lower Molding |
|---|---|
| Primary OE reference | 75313-TLC-A01 |
| Internal item code | HD02034-009 |
| Vehicle brand | HONDA |
| Model | CR-V |
| Vehicle year | 2017-2022 |
| Application | 2017-2022 HONDA CR-V |
| Installation position | Rear right door, lower exterior edge |
| Product form | Sculpted rear side-door garnish |
| Cross-reference numbers | 75313-TLC-A01 |
Controlled Panel Installation
Keep the raised rear section supported during alignment. Locate the main mounting rail first, check the gap along the door perimeter, and secure the clips gradually so the ribbed face is not distorted.
Collision-Repair Ordering
When repairing several panels on one side, list each door location separately. Providing photos of the remaining front-door molding gives the supplier a useful reference for finish and trim-level consistency.
Frequently Asked Questions
Which CR-V years use 75313-TLC-A01?
The listed application covers 2017-2022 vehicles, subject to OE and trim confirmation.
What are the main visual identifiers?
Look for the broad ribbed face and the pronounced upward sweep at the rear end.
Is the molding supplied for the driver side?
No. This listing is for the right rear, passenger-side door position.
Why must the raised end be supported?
Unsupported pressure can twist the sculpted corner and produce an uneven body gap.
What helps identify the correct trim level?
Send the OE number, vehicle year, photographs of adjacent trim and the internal SKU.
