75312-TLC-A01 Front Right Door Lower Molding for 2017-2022 Honda CR-V
Primary OE reference: 75312-TLC-A01
Cross-reference 1: 75312-TLC-A01
Product type: Front Right Door Lower Molding
Applicable vehicle: 2017-2022 HONDA CR-V
Installation position: Front right door, lower exterior edge
Brand: HONDA
Model: CR-V
Vehicle year: 2017-2022
Component scope: Wide lower cladding for the passenger-side front door of 2017-2022 CR-V models.
Panel identity: Long face with a broad central section and a tapered wheel-side extension.
Body-line check: Compare the upper edge, front termination and rear taper with the original front trim.
Mounting details: Review reverse rails, clip receivers and edge returns before final placement.
Adjacent-panel match: Confirm texture and height align with the right rear door cladding.
Fitting preparation: Dry-position the wide panel, check door clearance and engage the centre points first.
Receiving inspection: Inspect the large visible face for dents, rub marks and edge deformation.
Order information: Use OE 75312-TLC-A01 and SKU HD02034-010 for a front-right quotation.
Wide Front Door Cladding
OE 75312-TLC-A01 corresponds to the lower exterior cladding on the right front door of 2017-2022 Honda CR-V models. Its wide face and elongated body are engineered to continue the lower protective line from the front fender toward the rear door.
Front-Door Geometry
The component includes a broad centre surface, a defined upper edge and a tapered end near the wheel-side transition. Compare these contours with the removed panel and the matching rear-door cladding before installation.
Position and Version Selection
Use the complete OE number to distinguish this passenger-front piece from rear and opposite-side panels. Confirm model year and trim appearance because surface patterns can change without an obvious difference in catalogue thumbnails.
Automotive Replacement Part Specifications
| Product type | Front Right Door Lower Molding |
|---|---|
| Primary OE reference | 75312-TLC-A01 |
| Internal item code | HD02034-010 |
| Vehicle brand | HONDA |
| Model | CR-V |
| Vehicle year | 2017-2022 |
| Application | 2017-2022 HONDA CR-V |
| Installation position | Front right door, lower exterior edge |
| Product form | Wide front side-door cladding panel |
| Cross-reference numbers | 75312-TLC-A01 |
Alignment and Door Clearance
Begin with a dry fit and check that the panel does not interfere with the door edge or neighbouring trim. Seat the central mounting points first, then work outward while maintaining an even top gap.
Bulk Supply and Surface Protection
The large visible face should be isolated from hard hardware during transport. Body shops and distributors can request multi-piece packing by identifying the front-right location, OE reference, SKU and destination quantity.
Frequently Asked Questions
What part is 75312-TLC-A01?
It is the wide lower molding or cladding for the right front door of applicable 2017-2022 CR-V vehicles.
Which contour should be compared first?
Check the upper body line and the tapered end closest to the wheel-side transition.
Will the right rear molding substitute for it?
No. The rear component is shorter and has a different sculpted termination.
How can uneven gaps be avoided?
Dry-fit the panel, align the centre attachments and verify door clearance before pressing outward.
What information supports accurate picking?
Provide 75312-TLC-A01, SKU HD02034-010, front-right position, model years and quantity.
