74591-SNA-A00 Rear Left Fender Liner for HONDA Civic 2006
Primary OE reference: 74591-SNA-A00
Cross-reference 1: 74591-SNA-A00
Product type: Fender Liner
Applicable vehicle: 2006 HONDA Civic
Installation position: Rear Left wheel house
Brand: HONDA
Model: Civic
Vehicle year: 2006
Protection function: A rear left inner fender panel that limits dirt and water intrusion; recorded as a wheel-house liner application.
Fitment confirmation: Use HD02016-021 for the listed 2006 HONDA Civic enquiry, then verify the model generation and wheel-house position. Check the lower extensions and service openings against the original; to identify facelift and market differences early.
Mounting comparison: The component mounts around the rear left wheel opening and joins neighbouring splash protection pieces. Inspect the bumper-side overlap, sill-end contour and upper arch profile; so the liner can seat without forcing plastic retainers.
Supply scope: The liner itself is the controlled item; mud flaps, bumper guides and screws require separate confirmation.
Receiving focus: Retain the carton until the component passes incoming inspection; before mixed consignments are divided between workshops.
Purchase preparation: Request final fitment confirmation before approving volume production; to prioritise workshop needs without confusing replenishment orders.
74591-SNA-A00 Rear Left Fender Liner Overview
The component described here protects the wheel opening of the rear left position of 2006 HONDA Civic, where road spray and debris must be separated from adjacent body cavities.
Wheel-Arch Protection and Panel Design
Check the panel perimeter against the removed liner before approval for 74591-SNA-A00 on 2006 HONDA Civic, so the OE reference and the actual wheel-house part agree.
Vehicle and OE Fitment Confirmation
Compare the removed liner’s molded code and hole pattern for this rear left liner, so the physical interfaces support the stated application.
Product Technical Specifications
| Product type | Fender Liner |
|---|---|
| Primary OE reference | 74591-SNA-A00 |
| Internal item code | HD02016-021 |
| Vehicle brand | HONDA |
| Model | Civic |
| Position | Rear Left wheel house |
| Applicable vehicle | 2006 HONDA Civic |
| Cross-reference numbers | 74591-SNA-A00 |
Installation and Receiving Guidance
Look for transit distortion around long unsupported edges when 74591-SNA-A00 arrives, before the old hardware is committed to the replacement.
Wholesale Ordering Information
Provide VIN details if the application sits near a model-year change for 74591-SNA-A00 and the rear left 2006 HONDA Civic application, to keep the quotation traceable to the correct product page.
Frequently Asked Questions
How can I confirm 74591-SNA-A00 fits my vehicle?
Match the bumper, undertray and mud-flap interfaces before ordering for 2006 HONDA Civic. so material and panel coverage are not assumed.
Which wheel-house position uses 74591-SNA-A00?
74591-SNA-A00 is recorded for the rear left position. Confirm the side and axle against the removed liner before ordering.
What should be checked when 74591-SNA-A00 is received?
Verify the SKU, OE number and installation side at receiving. so long panels do not remain bent under stacked cartons.
What is included with the 74591-SNA-A00 supply?
Supply is based on the shown wheel-house liner, while reusable fasteners normally remain vehicle-specific.
Which details are needed for a 74591-SNA-A00 quotation?
Identify the axle position and material reference in the enquiry for HD02016-021. so the requested component matches the photographed construction.
