74551-SNA-A00 Rear Right Fender Liner for HONDA Civic 2006
Primary OE reference: 74551-SNA-A00
Cross-reference 1: 74551-SNA-A00
Product type: Fender Liner
Applicable vehicle: 2006 HONDA Civic
Installation position: Rear Right wheel house
Brand: HONDA
Model: Civic
Vehicle year: 2006
Protection function: A molded or formed rear right wheel-arch barrier, catalogued with a wheel-house liner application.
Fitment confirmation: Match HD02016-022 with the 2006 HONDA Civic application and verify the existing liner’s side and mounting layout. Record the model, production year and wheel position on the enquiry; to maintain a traceable OE-based purchasing record.
Mounting comparison: Inside the rear right wheel arch, the liner aligns with existing clips, screws and overlap edges. Assess the OE marking and physical geometry as one identification set; to reduce returns caused by identification from the front view alone.
Supply scope: This page identifies one side-specific liner, with mounting hardware included only when explicitly stated.
Receiving focus: Separate each OE line in mixed-model shipments; so long panels do not remain bent under stacked cartons.
Purchase preparation: Send the complete OE number with the vehicle model and installation side; so curved panels receive suitable carton support.
74551-SNA-A00 Rear Right Fender Liner Overview
The recorded liner specification belongs to the rear right position of 2006 HONDA Civic, for collision repair, wheel-arch refurbishment and wholesale purchasing.
Wheel-Arch Protection and Panel Design
Match the molded ribs, edge returns and attachment-hole sequence for 74551-SNA-A00 on 2006 HONDA Civic, so the replacement does not interfere with the tyre or suspension travel.
Vehicle and OE Fitment Confirmation
Check the lower extensions and service openings against the original for this rear right liner, before workshop scheduling depends on the replacement.
Product Technical Specifications
| Product type | Fender Liner |
|---|---|
| Primary OE reference | 74551-SNA-A00 |
| Internal item code | HD02016-022 |
| Vehicle brand | HONDA |
| Model | Civic |
| Position | Rear Right wheel house |
| Applicable vehicle | 2006 HONDA Civic |
| Cross-reference numbers | 74551-SNA-A00 |
Installation and Receiving Guidance
Check the liner under neutral lighting for cracks or pressure marks when 74551-SNA-A00 arrives, so long panels do not remain bent under stacked cartons.
Wholesale Ordering Information
Provide VIN details if the application sits near a model-year change for 74551-SNA-A00 and the rear right 2006 HONDA Civic application, to keep the quotation traceable to the correct product page.
Frequently Asked Questions
How can I confirm 74551-SNA-A00 fits my vehicle?
Use clear front-and-rear photos when the original code is unreadable for 2006 HONDA Civic. so fitment is not based on vehicle name alone.
Which wheel-house position uses 74551-SNA-A00?
74551-SNA-A00 is recorded for the rear right position. Confirm the side and axle against the removed liner before ordering.
What should be checked when 74551-SNA-A00 is received?
Confirm the perimeter, mounting points and lower extensions on arrival. so long panels do not remain bent under stacked cartons.
What is included with the 74551-SNA-A00 supply?
The photographed splash shield defines the supply boundary for this OE line.
Which details are needed for a 74551-SNA-A00 quotation?
Attach the removed part’s molded reference when available for HD02016-022. so the approved appearance remains clear to both parties.
