74150M63J00 Blower Motor for SUZUKI Swift
Primary OE reference: 74150M63J00
Product type: Automotive HVAC Blower Motor
Applicable vehicle: SUZUKI Swift
Brand: SUZUKI
Model: Swift
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
74150M63J00 Automotive Blower Motor Overview
The 74150M63J00 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6210-157, When the climate-control circuit commands 74150M63J00 airflow, the electric motor rotates the 74150M63J00 fan wheel inside the HVAC housing. Use 6210-157 when comparing this 74150M63J00 airflow configuration.
OE Reference and Application
The primary catalogue number is 74150M63J00. The recorded application is SUZUKI Swift. For 6210-157, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6210-157 with the approved OE reference.
HVAC Interface and 74150M63J00 installation
During work on 6210-157, If 74150M63J00 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 74150M63J00 motor is the only cause. Recheck 6210-157 before the lower trim is closed.
For item 6210-157, confirm that the 74150M63J00 centrifugal wheel clears its housing and that the 6210-157 connector lock engages without force. After seating 6210-157, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-157.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 74150M63J00 |
| Cross-reference numbers | 74150M63J00 |
| Vehicle brand | SUZUKI |
| Vehicle model | Swift |
| Model year | Confirm by OE reference |
| 74150M63J00 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6210-157, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-157 record remains the picking reference.
For trade item 6210-157, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-157 on the packing instruction.
Frequently Asked Questions
How should item 6210-157 and blower number 74150M63J00 be verified?
Match 6210-157 to the complete 74150M63J00 marking, then compare the 6210-157 plug, terminal count, mounting flange and wheel dimensions with the removed SUZUKI unit.
Can 6210-157 have more than one vehicle-side blower configuration?
Yes. SUZUKI production changes can affect 6210-157; confirm steering position, climate-control specification and the original 6210-157 geometry before approval.
What circuit checks are useful when 6210-157 does not operate?
For 6210-157, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-157 motor again.
Which details should accompany a wholesale request for 6210-157?
Provide item 6210-157, OE 74150M63J00, the stated application, quantity and destination; add 6210-157 carton or private-label requirements separately.
How can noise be avoided after fitting 6210-157?
Clear debris from the air inlet, check that the 6210-157 wheel turns freely, seat the 6210-157 flange evenly and keep wiring away from the impeller.
Request a quote for 6210-157: Send 74150M63J00, the 6210-157 application and required quantity for a fitment and supply review.
