74150-57M00 Blower Motor for SUZUKI Jimny
Primary OE reference: 74150-57M00
Product type: Automotive HVAC Blower Motor
Applicable vehicle: SUZUKI Jimny
Brand: SUZUKI
Model: Jimny
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
74150-57M00 Automotive Blower Motor Overview
This listing links 74150-57M00 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6225-044, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6225-044 when comparing this 74150-57M00 airflow configuration.
OE Reference and Application
The primary catalogue number is 74150-57M00. The recorded application is SUZUKI Jimny. For 6225-044, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6225-044 with the approved OE reference.
HVAC Interface and 74150-57M00 installation
During work on 6225-044, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 74150-57M00 installation. Recheck 6225-044 before the lower trim is closed.
For item 6225-044, confirm that the 74150-57M00 centrifugal wheel clears its housing and that the 6225-044 connector lock engages without force. After seating 6225-044, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6225-044.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 74150-57M00 |
| Cross-reference numbers | 74150-57M00 |
| Vehicle brand | SUZUKI |
| Vehicle model | Jimny |
| Model year | Confirm by OE reference |
| 74150-57M00 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6225-044, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6225-044 record remains the picking reference.
For trade item 6225-044, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6225-044 on the packing instruction.
Frequently Asked Questions
How should item 6225-044 and blower number 74150-57M00 be verified?
Match 6225-044 to the complete 74150-57M00 marking, then compare the 6225-044 plug, terminal count, mounting flange and wheel dimensions with the removed SUZUKI unit.
Can 6225-044 have more than one vehicle-side blower configuration?
Yes. SUZUKI production changes can affect 6225-044; confirm steering position, climate-control specification and the original 6225-044 geometry before approval.
What circuit checks are useful when 6225-044 does not operate?
For 6225-044, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6225-044 motor again.
Which details should accompany a wholesale request for 6225-044?
Provide item 6225-044, OE 74150-57M00, the stated application, quantity and destination; add 6225-044 carton or private-label requirements separately.
How can noise be avoided after fitting 6225-044?
Clear debris from the air inlet, check that the 6225-044 wheel turns freely, seat the 6225-044 flange evenly and keep wiring away from the impeller.
Request a quote for 6225-044: Send 74150-57M00, the 6225-044 application and required quantity for a fitment and supply review.
