74115-TBT-H01 Bumper Corner Trim for HONDA Crider 2019 Right
Primary OE reference: 74115-TBT-H01
Cross-reference number 1: 74115-TBT-H01
Cross-reference number 2: 74115TBTH01
Product: Bumper Corner Trim
Vehicle: HONDA Crider 2019
Installation area: Body exterior
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-059
Fitment note: confirm the surface specification; match the original clip spacing; check the vehicle build date before ordering 74115-TBT-H01
Product comparison: compare the original edge profile; inspect the moulding width; check the bumper interface against the removed bumper corner trim
Installation note: inspect the surrounding guides; avoid bending long sections; confirm the final trim gap on the Crider
Wholesale enquiry: check the ordered mounting side; confirm the delivery schedule; include the complete OE number for HD02005-059
Application guidance: This bumper corner trim is intended for the right body exterior position on Crider. Also inspect the original contour, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
74115-TBT-H01 Bumper Corner Trim Product Overview
For HONDA Crider 2019 exterior repair sourcing, OE reference 74115-TBT-H01 points to the listed bumper corner trim. Catalogue code HD02005-059 belongs to the body exterior area and should be checked as an application-specific component.
This bumper corner trim is intended for the right body exterior position on Crider. Also inspect the original contour, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
Fitment and Application for Crider
When comparing 74115-TBT-H01 with the removed part, check adjacent garnish pieces, compare the complete OE number, and verify the mounting side. Before final installation, confirm the installation position, compare the removed trim, and match the original clip spacing.
For the listed 2019 application, match the stated body style, review market-specific styling, and match the original clip spacing. During receiving inspection, verify the mounting side, check the vehicle build date, and confirm the vehicle market.
Before the removed component is discarded, confirm the installation position, match the bumper outline, and compare the removed trim. Before the quotation is confirmed, confirm the surface specification, match the original clip spacing, and confirm the vehicle market.
Bumper Corner Trim Design and Replacement Notes
Before confirming this verify against the original part bumper corner trim, compare the original length, review the outer-edge shape, and compare the end termination. For a repeat wholesale order, check the adjoining gap, compare visible edge height, and check the moulding curvature.
For HONDA Crider 2019, review the outer-edge shape, examine the visible finish, and compare the original edge profile. While reviewing the supplied photographs, inspect the locator direction, check the moulding curvature, and review the centre alignment.
When preparing a Crider exterior repair, compare the end termination, compare gloss or plating, and compare the original length. Before final installation, compare visible edge height, compare the original edge profile, and compare the end termination.
For a direct comparison of 74115-TBT-H01, check adjacent garnish pieces, review nearby cover openings, protect painted panel edges, and state the required quantity. The bumper corner trim should match the original right body exterior profile before it is installed or released for shipment.
Installation Guidance
When comparing 74115-TBT-H01 with the removed part, check lamp-cover clearance, inspect the surrounding guides, and transfer reusable clips carefully. When checking the visible exterior face, protect painted panel edges, support the trim evenly, and avoid bending long sections.
For the listed 2019 application, confirm an even seated fit, confirm the final trim gap, and protect the visible surface. At the workshop preparation stage, inspect damaged mounting points, confirm locator engagement, and check lamp-cover clearance.
Before the removed component is discarded, protect the visible surface, confirm locator engagement, and protect painted panel edges. For a repeat wholesale order, confirm the final trim gap, inspect damaged mounting points, and check lamp-cover clearance.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 74115-TBT-H01 |
| Cross-reference numbers | 74115-TBT-H01 74115TBTH01 |
| Internal item code | HD02005-059 |
| Vehicle brand | HONDA |
| Vehicle model | Crider |
| Model year | 2019 |
| Installation area | Body exterior |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Crider 2019 |
Wholesale Supply and Packing
Before confirming this verify against the original part bumper corner trim, retain the product label, state the target application, and confirm separate accessory needs. Before clips or hardware are transferred, check the ordered mounting side, request export quotation terms, and state the destination port.
For HONDA Crider 2019, check the ordered mounting side, confirm the delivery schedule, and include the complete OE number. During the physical comparison, inspect the receiving condition, confirm separate accessory needs, and confirm the packing method.
When preparing a Crider exterior repair, request protective inner packing, support the moulding length, and check the ordered mounting side. When checking the visible exterior face, provide the delivery country, retain the product label, and request export quotation terms.
Before commercial confirmation, verify that the offer cites 74115-TBT-H01, HD02005-059 and the right application. Ask for packaging that supports the moulding length without rubbing its visible face.
Frequently Asked Questions
Can a photo alone verify 74115-TBT-H01?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 74115-TBT-H01 and HD02005-059 with the removed part dimensions. For Crider, compare the complete OE number, compare the original edge profile, support the trim evenly, and retain the product label before installation or quotation.
Is professional installation recommended for 74115-TBT-H01?
Yes. A workshop can dry-fit HD02005-059, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Crider, check nearby lamp openings, review transferred hardware, protect painted panel edges, and confirm the surface requirement before installation or quotation.
Can the opposite-side trim replace 74115-TBT-H01?
Normally no. The listing specification details the right orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Crider, confirm the surface specification, check the moulding curvature, transfer reusable clips carefully, and request protective inner packing before installation or quotation.
What product does OE 74115-TBT-H01 identify?
74115-TBT-H01 is listed here as a bumper corner trim. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Crider, match the stated body style, inspect the back-side structure, inspect the surrounding guides, and state annual purchasing volume before installation or quotation.
How should the position of 74115-TBT-H01 be confirmed?
This listing specification details a right component for the body exterior area. Compare the removed part, mounting direction and termination points before confirmation. For Crider, review market-specific styling, compare the end termination, check lamp-cover clearance, and state the target application before installation or quotation.
Request a Quote
Send the complete OE reference 74115-TBT-H01, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
