72450-SNA-A01 Front Door Outer Window Weatherstrip for 2012 HONDA Ciimo
Primary OE reference: 72450-SNA-A01
Cross-reference 1: 72450-SNA-A01
Product type: Front Door Outer Window Weatherstrip
Applicable vehicle: 2012 HONDA Ciimo
Installation position: Front Door Window Beltline
Brand: HONDA
Model: Ciimo
Vehicle year: 2012
Product form: Vehicle-specific front door outer glass weatherstrip
Product identification: This front-door strip is identified by its catalog number and glass-edge geometry, not by length or black finish alone.
Functional purpose: Creates the front-door contact edge that shields the door cavity and supports smooth movement of the side window.
Fitment confirmation: Confirm the front-door position and use the original carrier geometry, wiping-lip direction and clip spacing as physical references.
Receiving inspection: Open the carton on a clean surface and check that the wiping lip is continuous, the carrier is not kinked and the ends remain square.
Wholesale enquiry: Keep front and rear door references on separate purchase-order lines and specify carton labeling for distributor stock.
72450-SNA-A01 Front Door Outer Window Weatherstrip Overview
OE 72450-SNA-A01 identifies the exterior weatherstrip used along the front-door glass beltline of the 2012 HONDA Ciimo. The profile is selected by its full number and door geometry rather than by a generic rubber-strip description.
Front Window Wiping Surface and Door-Cavity Shielding
The front belt molding works at the lower glass edge where rainwater, dust and road film collect. Its wiping lip and rigid carrier must follow the glass path evenly while leaving the window free to travel without drag or chatter.
OE Reference and Application Verification
Use 72450-SNA-A01 as the primary catalog key and compare overall length, leading-end contour and the arrangement of hidden retainers. Check the production version if the original strip lacks a readable label.
Product Specifications
| Product type | Front Door Outer Window Weatherstrip |
|---|---|
| Primary OE reference | 72450-SNA-A01 |
| Internal item code | HD02030-005 |
| Vehicle brand | HONDA |
| Model | Ciimo |
| Vehicle year | 2012 |
| Application | 2012 HONDA Ciimo |
| Installation position | Front Door Window Beltline |
| Product form | Vehicle-specific front door outer glass weatherstrip |
| Cross-reference numbers | 72450-SNA-A01 |
Handling and Installation Guidance
Protect the painted door edge before removal and lift the old part gradually instead of levering at one point. During fitting, seat the carrier parallel to the glass and verify smooth window movement before reinstalling adjacent trim.
Wholesale and Distributor Supply
Distributors requesting 72450-SNA-A01 should state order volume, destination and labeling requirements. Separate this front-door item from rear-door references on purchase orders and carton marks.
Frequently Asked Questions
How can buyers confirm 72450-SNA-A01 fits the vehicle?
Match the catalog number to the front-door position and compare the leading edge, overall span and wiping-lip orientation with the original part.
What is the function of 72450-SNA-A01?
The weatherstrip wipes the moving front glass and reduces the amount of rainwater and dirt that can pass into the door cavity.
Is 72450-SNA-A01 a universal replacement?
The listing covers the stated front-door position on the HONDA Ciimo; belt moldings from other doors or regional body variants are not assumed interchangeable.
What should be inspected before installing 72450-SNA-A01?
Review the painted flange, retainer sockets and window alignment before fitting. The glass should move freely after the new strip is seated.
What information is needed for a wholesale quote on 72450-SNA-A01?
Send the full reference, required units, destination and any labeling or consolidated-carton instructions.
