71706-31E-H00 Front Bumper Spoiler for HONDA HR-V 2023
Product: Front Bumper Spoiler
Primary OE: 71706-31E-H00
Item code: HD02003-005
Cross-reference numbers:
71706-31E-H00
Brand: HONDA
Model: HR-V
Application reference: 2023 HONDA HR-V
Position: Front
Verification: Verify the full application record and complete a non-destructive trial fit before sanding, drilling or painting.
Supply note: Identify sample or bulk demand and include the destination so shipment volume and protection can be evaluated.
71706-31E-H00 is supplied as a sourcing reference for repair programmes that separate fitment approval from finishing. For 2023 HONDA HR-V, Yongshang Auto tracks the requested front bumper spoiler as HD02003-005.
HD02003-005 requires an application-specific review: The quotation should state whether the request concerns a complete bumper-aero component, an upper section or a lower section to avoid an incorrect comparison. This review is especially useful near model-year or equipment transitions.
Compatibility Review for This Reference
Fitment guidance for 71706-31E-H00. Send close views of sensor seats, tow-eye covers and lamp apertures. Their location and shape often provide faster confirmation than exterior colour or finish. The completed check supports a traceable discussion between buyer and supplier.
The front location on 2023 HONDA HR-V should be reviewed as follows: Ask the workshop to identify every transferable component from the removed bumper-aero part. Grilles, lamps, mouldings, sensors and fasteners are normally reviewed separately from the outer panel. The buyer can then connect the physical review to the supplier item record.
Product Technical Specifications
| Product type | Front Bumper Spoiler |
|---|---|
| Primary OE reference | 71706-31E-H00 |
| Cross-reference numbers | 71706-31E-H00 |
| Internal item code | HD02003-005 |
| Vehicle brand | HONDA |
| Vehicle model | HR-V |
| Model year | 2023 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2023 HONDA HR-V |
How the bumper-aero component Completes the Bumper System
Functional context for 71706-31E-H00. Its broad surface restores the visual continuity of the vehicle after damage. The repairer should evaluate waviness, edge condition and aperture shape during incoming inspection. The repairer should document the outcome before transferring trim components.
Application note for item HD02003-005. The outer bumper-aero component contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. A dated photo record makes the decision easier to review if questions arise later.
Surface Review Before Refinishing
Receiving note for carton HD02003-005. Do not judge the panel while it is twisted on the floor or leaning against a sharp edge. Support it near its designed mounting orientation before checking contour. The same information helps receiving staff identify the correct carton and panel.
Pre-finish check for 2023 HONDA HR-V. On receipt, remove the bumper-aero component without dragging it across staples or rough carton edges. Inspect both corners, all tabs and the broad visible face under even lighting. This evidence belongs in the same approval file as the vehicle photographs.
Sample Approval and Quantity Planning
A quotation for 71706-31E-H00 should reflect this guidance: Add consignee restrictions, carton-size limits and pallet rules to the initial request. Late packaging changes can affect both cost and achievable container utilisation. The repairer should document the outcome before transferring trim components.
The 1 square image attached to HD02003-005 support visual review. Request packing dimensions and gross-volume estimates before finalising freight. bumper spoilers and air deflectors can be lightweight but consume substantial shipment space. This evidence belongs in the same approval file as the vehicle photographs.
Frequently Asked Questions
Which comparison points matter for OE 71706-31E-H00?
2023 HONDA HR-V is the stated reference for this page. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. Those observations should remain available during sample and bulk-order review.
Where should buyers record item number HD02003-005?
Supplier-code context for this front bumper spoiler. Include the OE reference, internal item code, required quantity and destination country. Add vehicle photographs when the market version or equipment grade may affect the panel. Keep HD02003-005 beside 71706-31E-H00 in the final commercial record.
Which physical areas require comparison on this front cover?
Panel-comparison guidance for 2023 HONDA HR-V. Request a full photographic record of the removed bumper-aero part and vehicle. Include labels, side retainers, upper fixings, lower mounts and all grille or lamp openings. This evidence belongs in the same approval file as the vehicle photographs.
At what stage should refinishing begin for 2023 HONDA HR-V?
Finishing guidance for OE 71706-31E-H00. Resolve damaged brackets or uncertain equipment openings first; coating the part should be the last step in the approval sequence. This evidence belongs in the same approval file as the vehicle photographs.
Which facts allow packaging and freight planning to begin?
Wholesale request for HD02003-005. Confirm whether loose accessories are expected and specify carton marks, corner protection and pre-shipment photograph requirements. This sequence keeps catalogue selection separate from cosmetic preparation.
Request a Quote for 71706-31E-H00
Include the OE reference, internal item code, required quantity and destination country. Add vehicle photographs when the market version or equipment grade may affect the panel. For Yongshang Auto’s review, connect 71706-31E-H00 and HD02003-005 with the intended 2023 HONDA HR-V, requested quantity and delivery market.
