71519-TME-T10 Bumper Trim Molding for HONDA CR-V 2017 Left

71519-TME-T10 Bumper Trim Molding Product Overview

This application-led listing presents 71519-TME-T10 as a bumper trim molding for HONDA CR-V 2017 (standard-spec version). Item HD02005-073 is intended for OE-number comparison rather than shape-only selection. The stated application includes the standard-spec version.

For replacement work on HONDA CR-V 2017 (standard-spec version), retain the old trim until trial fitting is complete. Also compare the complete OE number, review the centre alignment, clean the mounting channel, and confirm sample requirements.

Fitment and Application for CR-V

For HONDA CR-V 2017 (standard-spec version), match the original clip spacing, verify the mounting side, and check the vehicle build date. Before packing the confirmed item, confirm the vehicle market, compare every attachment point, and review the end profiles.

When preparing a CR-V exterior repair, review facelift differences, inspect the original contour, and check nearby lamp openings. For a no-force trial fit, review market-specific styling, check the vehicle build date, and review the end profiles.

During comparison with the original bumper trim, review market-specific styling, confirm the surface specification, and compare the complete OE number. While checking adjacent body parts, inspect the original contour, match the bumper outline, and check adjacent garnish pieces.

Bumper Trim Molding Design and Replacement Notes

For the listed 2017 application, inspect narrow moulding ends, check the adjoining gap, and review transferred hardware. During receiving inspection, compare the original length, inspect the back-side structure, and check the bumper interface.

Before the removed component is discarded, review nearby cover openings, examine the visible finish, and review the centre alignment. Before the quotation is confirmed, review the surface texture, review transferred hardware, and review nearby cover openings.

During an OE-led check for HD02005-073, inspect the locator direction, compare gloss or plating, and review nearby cover openings. Before packing the confirmed item, check the moulding curvature, inspect narrow moulding ends, and compare visible edge height.

For a direct comparison of 71519-TME-T10, review the end profiles, compare the original length, avoid bending long sections, and state the target application. The bumper trim molding should match the original left rear profile before it is installed or released for shipment.

Installation Guidance

For HONDA CR-V 2017 (standard-spec version), align the centre first, check adjacent panel gaps, and retain the removed component. While reviewing the supplied photographs, confirm the fitting direction, check the final perimeter, and inspect the surrounding guides.

When preparing a CR-V exterior repair, retain the removed component, check the final perimeter, and support the trim evenly. Before final installation, check adjacent panel gaps, confirm the fitting direction, and inspect the surrounding guides.

During comparison with the original bumper trim, check the final perimeter, confirm an even seated fit, and review the completed alignment. During receiving inspection, inspect the surrounding guides, confirm the final trim gap, and clean the mounting channel.

Product Technical Specifications

Wholesale Supply and Packing

For the listed 2017 application, confirm the delivery schedule, include the complete OE number, and inspect the receiving condition. At the workshop preparation stage, confirm separate accessory needs, confirm the packing method, and provide the delivery country.

Before the removed component is discarded, confirm the surface requirement, review carton edge protection, and confirm the delivery schedule. For a repeat wholesale order, protect projecting locators, compare the supplied photographs, and state the required quantity.

During an OE-led check for HD02005-073, confirm sample requirements, confirm separate accessory needs, and state annual purchasing volume. While reviewing the supplied photographs, state the destination port, state the required quantity, and include the complete OE number.

Distributors sourcing 71519-TME-T10 should keep HD02005-073 and the left position on every quotation revision. Sample confirmation, carton marking and repeat-order specification details should use the same part number chain.

Frequently Asked Questions

Does 71519-TME-T10 have a fixed surface finish?

The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For CR-V, compare the mounting direction, inspect the moulding width, confirm an even seated fit, and confirm the delivery schedule before installation or quotation.

Is a model name alone enough to order 71519-TME-T10?

No. The CR-V name is useful for discovery, but OE number 71519-TME-T10, VIN or build data, side, finish and physical attachment points should agree. For CR-V, inspect the original contour, compare gloss or plating, avoid bending long sections, and check the ordered mounting side before installation or quotation.

What should be inspected when 71519-TME-T10 arrives?

Check the bumper trim molding part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For CR-V, compare the removed trim, examine the visible finish, support the trim evenly, and confirm sample requirements before installation or quotation.

What information is needed for a 71519-TME-T10 quotation?

Send HONDA CR-V 2017 (standard-spec version) vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For CR-V, compare the complete OE number, check the adjoining gap, protect painted panel edges, and request supported carton packing before installation or quotation.

How should 71519-TME-T10 be packed for export?

Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For CR-V, check nearby lamp openings, inspect the locator direction, transfer reusable clips carefully, and state the required quantity before installation or quotation.

Request a Quote

Send the complete OE reference 71519-TME-T10, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.