71519-TKM-H50 Bumper Trim Molding for HONDA Elysion 2022 Left
Primary OE reference: 71519-TKM-H50
Cross-reference number 1: 71519-TKM-H50
Cross-reference number 2: 71519TKMH50
Product: Bumper Trim Molding
Vehicle: HONDA Elysion 2022
Installation area: Rear
Side / orientation: Left
Surface detail: dark chrome
Internal item code: HD02005-166
Fitment note: verify the mounting side; verify the mounting side; compare the mounting direction before ordering 71519-TKM-H50
Product comparison: inspect the locator direction; check the panel transition; review transferred hardware against the removed bumper trim molding
Installation note: protect the visible surface; inspect every screw point; support the trim evenly on the Elysion
Wholesale enquiry: compare the supplied photographs; retain the product label; confirm sample requirements for HD02005-166
Application guidance: For replacement work on HONDA Elysion 2022, retain the old trim until trial fitting is complete. Also review the end profiles, review the centre alignment, clean the mounting channel, and confirm sample requirements.
71519-TKM-H50 Bumper Trim Molding Product Overview
For HONDA Elysion 2022 exterior repair sourcing, OE reference 71519-TKM-H50 points to the listed bumper trim molding. Catalogue code HD02005-166 belongs to the rear area and should be checked as an application-specific component.
For replacement work on HONDA Elysion 2022, retain the old trim until trial fitting is complete. Also review the end profiles, review the centre alignment, clean the mounting channel, and confirm sample requirements.
Fitment and Application for Elysion
When comparing 71519-TKM-H50 with the removed part, review market-specific styling, review the end profiles, and compare the mounting direction. Before final installation, match the stated body style, compare every attachment point, and match the bumper outline.
For the listed 2022 application, check adjacent garnish pieces, review facelift differences, and match the bumper outline. During receiving inspection, compare the mounting direction, inspect the original contour, and compare the removed trim.
Before the removed component is discarded, match the stated body style, verify the mounting side, and compare every attachment point. Before the quotation is confirmed, confirm the installation position, match the bumper outline, and compare the removed trim.
Bumper Trim Molding Design and Replacement Notes
Before confirming this dark chrome bumper trim molding, compare gloss or plating, check the bumper interface, and compare the original edge profile. For a repeat wholesale order, check the panel transition, compare the original length, and review the outer-edge shape.
For HONDA Elysion 2022, check the bumper interface, review nearby cover openings, and compare visible edge height. While reviewing the supplied photographs, inspect the moulding width, review the outer-edge shape, and examine the visible finish.
When preparing a Elysion exterior repair, compare the original edge profile, compare the end termination, and compare gloss or plating. Before final installation, compare the original length, compare visible edge height, and compare the original edge profile.
For a direct comparison of 71519-TKM-H50, review facelift differences, compare the end termination, transfer reusable clips carefully, and request export quotation terms. The bumper trim molding should match the original left rear profile before it is installed or released for shipment.
Installation Guidance
When comparing 71519-TKM-H50 with the removed part, check lamp-cover clearance, inspect the surrounding guides, and transfer reusable clips carefully. When checking the visible exterior face, protect painted panel edges, support the trim evenly, and avoid bending long sections.
For the listed 2022 application, confirm an even seated fit, confirm the final trim gap, and protect the visible surface. At the workshop preparation stage, inspect damaged mounting points, confirm locator engagement, and check lamp-cover clearance.
Before the removed component is discarded, protect the visible surface, confirm locator engagement, and protect painted panel edges. For a repeat wholesale order, confirm the final trim gap, inspect damaged mounting points, and check lamp-cover clearance.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71519-TKM-H50 |
| Cross-reference numbers | 71519-TKM-H50 71519TKMH50 |
| Internal item code | HD02005-166 |
| Vehicle brand | HONDA |
| Vehicle model | Elysion |
| Model year | 2022 |
| Installation area | Rear |
| Side / orientation | Left |
| Surface detail | dark chrome |
| Applicable vehicle | HONDA Elysion 2022 |
Wholesale Supply and Packing
Before confirming this dark chrome bumper trim molding, check the ordered mounting side, request export quotation terms, and state the destination port. Before clips or hardware are transferred, request protective inner packing, provide the delivery country, and include the complete OE number.
For HONDA Elysion 2022, request protective inner packing, confirm the surface requirement, and retain the product label. During the physical comparison, compare the supplied photographs, state the destination port, and send original-part photographs.
When preparing a Elysion exterior repair, request supported carton packing, confirm separate accessory needs, and request protective inner packing. When checking the visible exterior face, support the moulding length, check the ordered mounting side, and provide the delivery country.
Before commercial confirmation, verify that the offer cites 71519-TKM-H50, HD02005-166 and the left application. Ask for packaging that supports the moulding length without rubbing its visible face.
Frequently Asked Questions
Can a photo alone verify 71519-TKM-H50?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71519-TKM-H50 and HD02005-166 with the removed part dimensions. For Elysion, compare the removed trim, compare visible edge height, align the centre first, and request export quotation terms before installation or quotation.
Is professional installation recommended for 71519-TKM-H50?
Yes. A workshop can dry-fit HD02005-166, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Elysion, compare the complete OE number, review the surface texture, confirm an even seated fit, and review carton edge protection before installation or quotation.
Can the opposite-side trim replace 71519-TKM-H50?
Normally no. The listing specification details the left orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Elysion, check nearby lamp openings, review the outer-edge shape, avoid bending long sections, and support the moulding length before installation or quotation.
What product does OE 71519-TKM-H50 identify?
71519-TKM-H50 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Elysion, confirm the surface specification, inspect narrow moulding ends, support the trim evenly, and send original-part photographs before installation or quotation.
How should the position of 71519-TKM-H50 be confirmed?
This listing specification details a left component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Elysion, match the stated body style, compare the original edge profile, protect painted panel edges, and state the destination port before installation or quotation.
Request a Quote
Send the complete OE reference 71519-TKM-H50, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
