71517-T6D-H01 Bumper Trim Molding for HONDA Odyssey 2019 Left
Primary OE reference: 71517-T6D-H01
Cross-reference number 1: 71517-T6D-H01
Cross-reference number 2: 71517T6DH01
Product: Bumper Trim Molding
Vehicle: HONDA Odyssey 2019
Installation area: Rear
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-143
Fitment note: review the end profiles; check the vehicle build date; verify the mounting side before ordering 71517-T6D-H01
Product comparison: review transferred hardware; compare visible edge height; inspect the locator direction against the removed bumper trim molding
Installation note: review separate hardware needs; transfer reusable clips carefully; review the completed alignment on the Odyssey
Wholesale enquiry: confirm sample requirements; retain the product label; state annual purchasing volume for HD02005-143
Application guidance: A correct HD02005-143 selection should follow the original contour, finish and clip direction. Also match the stated body style, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.
71517-T6D-H01 Bumper Trim Molding Product Overview
For exterior line HD02005-143, the principal OE reference is 71517-T6D-H01. It is listed for HONDA Odyssey 2019 and should be approved from the number, vehicle data and rear mounting geometry together.
A correct HD02005-143 selection should follow the original contour, finish and clip direction. Also match the stated body style, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.
Fitment and Application for Odyssey
For a replacement on the left rear area, check adjacent garnish pieces, compare the mounting direction, and compare the complete OE number. Before clips or hardware are transferred, match the stated body style, verify the mounting side, and compare every attachment point.
When separating nearby Odyssey trim variants, match the stated body style, check nearby lamp openings, and compare the removed trim. During the physical comparison, compare the mounting direction, review facelift differences, and confirm the installation position.
When comparing 71517-T6D-H01 with the removed part, confirm the installation position, match the original clip spacing, and inspect the original contour. When checking the visible exterior face, review the end profiles, match the stated body style, and match the bumper outline.
Bumper Trim Molding Design and Replacement Notes
For wholesale selection of 71517-T6D-H01, review the outer-edge shape, check the moulding curvature, and check the panel transition. For a no-force trial fit, check the adjoining gap, check the bumper interface, and review the outer-edge shape.
Before sourcing this bumper trim molding for Odyssey, compare the end termination, review transferred hardware, and review the outer-edge shape. While checking adjacent body parts, inspect the fastening slots, compare the original length, and examine the visible finish.
Before confirming this verify against the original part bumper trim molding, check the adjoining gap, compare the original length, and check the bumper interface. Before clips or hardware are transferred, compare visible edge height, review the outer-edge shape, and compare the original edge profile.
For a direct comparison of 71517-T6D-H01, match the bumper outline, check the bumper interface, support the trim evenly, and state the destination port. The bumper trim molding should match the original left rear profile before it is installed or released for shipment.
Installation Guidance
For a replacement on the left rear area, align the centre first, retain the removed component, and check the final perimeter. Before the quotation is confirmed, support the trim evenly, check adjacent panel gaps, and confirm the fitting direction.
When separating nearby Odyssey trim variants, retain the removed component, check lamp-cover clearance, and inspect every screw point. Before packing the confirmed item, confirm the fitting direction, protect painted panel edges, and review separate hardware needs.
When comparing 71517-T6D-H01 with the removed part, check the final perimeter, confirm the final trim gap, and trial-fit without force. For a no-force trial fit, check adjacent panel gaps, check lamp-cover clearance, and review separate hardware needs.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71517-T6D-H01 |
| Cross-reference numbers | 71517-T6D-H01 71517T6DH01 |
| Internal item code | HD02005-143 |
| Vehicle brand | HONDA |
| Vehicle model | Odyssey |
| Model year | 2019 |
| Installation area | Rear |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Odyssey 2019 |
Wholesale Supply and Packing
For wholesale selection of 71517-T6D-H01, state the target application, state the destination port, and request supported carton packing. Before final installation, confirm separate accessory needs, request protective inner packing, and support the moulding length.
Before sourcing this bumper trim molding for Odyssey, request export quotation terms, confirm the delivery schedule, and provide the delivery country. During receiving inspection, confirm the surface requirement, support the moulding length, and confirm sample requirements.
Before confirming this verify against the original part bumper trim molding, provide the delivery country, support the moulding length, and confirm separate accessory needs. Before the quotation is confirmed, state the destination port, include the complete OE number, and retain the product label.
For repeat purchasing of 71517-T6D-H01, retain the approved Odyssey sample under supplier code HD02005-143. specification details revision dates whenever the vehicle application, finish or packaging specification changes.
Frequently Asked Questions
What product does OE 71517-T6D-H01 identify?
71517-T6D-H01 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Odyssey, compare the complete OE number, check the panel transition, confirm the final trim gap, and state the destination port before installation or quotation.
How should the position of 71517-T6D-H01 be confirmed?
This listing specification details a left component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Odyssey, check nearby lamp openings, inspect the moulding width, inspect every screw point, and compare the supplied photographs before installation or quotation.
Why should supplier code HD02005-143 stay on the enquiry?
HD02005-143 connects the 71517-T6D-H01 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For Odyssey, confirm the surface specification, compare gloss or plating, align the centre first, and retain the product label before installation or quotation.
Can a photo alone verify 71517-T6D-H01?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71517-T6D-H01 and HD02005-143 with the removed part dimensions. For Odyssey, match the stated body style, examine the visible finish, confirm an even seated fit, and confirm the surface requirement before installation or quotation.
Is professional installation recommended for 71517-T6D-H01?
Yes. A workshop can dry-fit HD02005-143, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Odyssey, review market-specific styling, check the adjoining gap, avoid bending long sections, and request protective inner packing before installation or quotation.
Request a Quote
Send the complete OE reference 71517-T6D-H01, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
