71511-TKN-H50 Rear Bumper Lamp Surround Trim for HONDA Odyssey 2022 Right
Primary OE reference: 71511-TKN-H50
Cross-reference number 1: 71511-TKN-H50
Cross-reference number 2: 71511TKNH50
Product: Rear Bumper Lamp Surround Trim
Vehicle: HONDA Odyssey 2022
Installation area: Rear
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-147
Fitment note: check adjacent garnish pieces; match the stated body style; confirm the vehicle market before ordering 71511-TKN-H50
Product comparison: inspect the moulding width; check the adjoining gap; review the centre alignment against the removed rear bumper lamp surround trim
Installation note: align the centre first; trial-fit without force; protect the visible surface on the Odyssey
Wholesale enquiry: send original-part photographs; retain the product label; protect projecting locators for HD02005-147
Application guidance: 71511-TKN-H50 is listed for HONDA Odyssey 2022; begin with the right rear profile. Also confirm the installation position, review the centre alignment, check adjacent panel gaps, and confirm sample requirements.
71511-TKN-H50 Rear Bumper Lamp Surround Trim Product Overview
A sourcing check for HONDA Odyssey 2022 can use 71511-TKN-H50 to locate this rear bumper lamp surround trim. The page states HD02005-147, right orientation and the practical details needed for product comparison.
71511-TKN-H50 is listed for HONDA Odyssey 2022; begin with the right rear profile. Also confirm the installation position, review the centre alignment, check adjacent panel gaps, and confirm sample requirements.
Fitment and Application for Odyssey
When preparing a Odyssey exterior repair, match the bumper outline, confirm the surface specification, and confirm the vehicle market. Before final installation, review facelift differences, check nearby lamp openings, and check the vehicle build date.
During comparison with the original bumper trim, match the original clip spacing, verify the mounting side, and check the vehicle build date. During receiving inspection, confirm the vehicle market, compare every attachment point, and review the end profiles.
For a replacement on the right rear area, review facelift differences, inspect the original contour, and check nearby lamp openings. Before the quotation is confirmed, review market-specific styling, check the vehicle build date, and review the end profiles.
Rear Bumper Lamp Surround Trim Design and Replacement Notes
Before the removed component is discarded, compare the original length, review the outer-edge shape, and compare the end termination. For a repeat wholesale order, check the adjoining gap, compare visible edge height, and check the moulding curvature.
During an OE-led check for HD02005-147, review the outer-edge shape, examine the visible finish, and compare the original edge profile. While reviewing the supplied photographs, inspect the locator direction, check the moulding curvature, and review the centre alignment.
For wholesale selection of 71511-TKN-H50, compare the end termination, compare gloss or plating, and compare the original length. Before final installation, compare visible edge height, compare the original edge profile, and compare the end termination.
For a direct comparison of 71511-TKN-H50, confirm the production year, compare gloss or plating, protect the visible surface, and provide the delivery country. The rear bumper lamp surround trim should match the original right rear profile before it is installed or released for shipment.
Installation Guidance
When preparing a Odyssey exterior repair, review the completed alignment, inspect damaged mounting points, and confirm the fitting direction. When checking the visible exterior face, clean the mounting channel, confirm locator engagement, and check the final perimeter.
During comparison with the original bumper trim, trial-fit without force, transfer reusable clips carefully, and avoid bending long sections. At the workshop preparation stage, inspect every screw point, review separate hardware needs, and review the completed alignment.
For a replacement on the right rear area, avoid bending long sections, review separate hardware needs, and clean the mounting channel. For a repeat wholesale order, transfer reusable clips carefully, inspect every screw point, and review the completed alignment.
Product Technical Specifications
| Product type | Rear Bumper Lamp Surround Trim |
|---|---|
| Primary OE reference | 71511-TKN-H50 |
| Cross-reference numbers | 71511-TKN-H50 71511TKNH50 |
| Internal item code | HD02005-147 |
| Vehicle brand | HONDA |
| Vehicle model | Odyssey |
| Model year | 2022 |
| Installation area | Rear |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Odyssey 2022 |
Wholesale Supply and Packing
Before the removed component is discarded, include the complete OE number, request supported carton packing, and support the moulding length. Before clips or hardware are transferred, retain the product label, state the target application, and confirm separate accessory needs.
During an OE-led check for HD02005-147, retain the product label, compare the supplied photographs, and state the destination port. During the physical comparison, send original-part photographs, support the moulding length, and review carton edge protection.
For wholesale selection of 71511-TKN-H50, check the ordered mounting side, provide the delivery country, and retain the product label. When checking the visible exterior face, request export quotation terms, include the complete OE number, and state the target application.
When requesting HD02005-147, state OE reference 71511-TKN-H50, finish requirement verify against the original part, annual demand and shipment destination. The visible surface standard is best agreed with a physical or photographic sample.
Frequently Asked Questions
Can a photo alone verify 71511-TKN-H50?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71511-TKN-H50 and HD02005-147 with the removed part dimensions. For Odyssey, match the bumper outline, compare the original edge profile, clean the mounting channel, and provide the delivery country before installation or quotation.
Is professional installation recommended for 71511-TKN-H50?
Yes. A workshop can dry-fit HD02005-147, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Odyssey, compare the mounting direction, review transferred hardware, confirm the fitting direction, and confirm the packing method before installation or quotation.
Can the opposite-side trim replace 71511-TKN-H50?
Normally no. The listing specification details the right orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Odyssey, inspect the original contour, check the moulding curvature, inspect damaged mounting points, and confirm separate accessory needs before installation or quotation.
What product does OE 71511-TKN-H50 identify?
71511-TKN-H50 is listed here as a rear bumper lamp surround trim. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Odyssey, compare the removed trim, inspect the back-side structure, review the completed alignment, and inspect the receiving condition before installation or quotation.
How should the position of 71511-TKN-H50 be confirmed?
This listing specification details a right component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Odyssey, compare the complete OE number, compare the end termination, retain the removed component, and include the complete OE number before installation or quotation.
Request a Quote
Send the complete OE reference 71511-TKN-H50, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
