71507-TFC-H00 Bumper Corner Trim for HONDA CR-V 2015 Left
Primary OE reference: 71507-TFC-H00
Cross-reference number 1: 71507-TFC-H00
Cross-reference number 2: 71507TFCH00
Product: Bumper Corner Trim
Vehicle: HONDA CR-V 2015
Installation area: Rear
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-068
Fitment note: match the stated body style; review the end profiles; review facelift differences before ordering 71507-TFC-H00
Product comparison: inspect the locator direction; check the panel transition; review transferred hardware against the removed bumper corner trim
Installation note: inspect every screw point; avoid bending long sections; transfer reusable clips carefully on the CR-V
Wholesale enquiry: confirm the delivery schedule; retain the product label; review carton edge protection for HD02005-068
Application guidance: Selection for CR-V should combine OE 71507-TFC-H00, body version and attachment geometry. Also check nearby lamp openings, review the centre alignment, protect painted panel edges, and confirm sample requirements.
71507-TFC-H00 Bumper Corner Trim Product Overview
71507-TFC-H00 identifies this bumper corner trim for HONDA CR-V 2015. Supplier reference HD02005-068 defines the left application and helps buyers compare the correct exterior profile before ordering.
Selection for CR-V should combine OE 71507-TFC-H00, body version and attachment geometry. Also check nearby lamp openings, review the centre alignment, protect painted panel edges, and confirm sample requirements.
Fitment and Application for CR-V
When separating nearby CR-V trim variants, check nearby lamp openings, match the bumper outline, and review the end profiles. Before packing the confirmed item, match the original clip spacing, compare the complete OE number, and review facelift differences.
When comparing 71507-TFC-H00 with the removed part, review the end profiles, compare the complete OE number, and compare every attachment point. For a no-force trial fit, compare the removed trim, confirm the vehicle market, and inspect the original contour.
For the listed 2015 application, compare the complete OE number, confirm the production year, and match the stated body style. While checking adjacent body parts, review facelift differences, verify the mounting side, and inspect the original contour.
Bumper Corner Trim Design and Replacement Notes
Before sourcing this bumper corner trim for CR-V, inspect the locator direction, check the panel transition, and review transferred hardware. During receiving inspection, compare visible edge height, inspect the locator direction, and check the panel transition.
Before confirming this verify against the original part bumper corner trim, review the surface texture, review nearby cover openings, and review the centre alignment. Before the quotation is confirmed, review transferred hardware, examine the visible finish, and review the surface texture.
For HONDA CR-V 2015, inspect the back-side structure, compare visible edge height, and examine the visible finish. Before packing the confirmed item, check the moulding curvature, inspect the fastening slots, and compare gloss or plating.
For a direct comparison of 71507-TFC-H00, compare the removed trim, compare the end termination, check adjacent panel gaps, and include the complete OE number. The bumper corner trim should match the original left rear profile before it is installed or released for shipment.
Installation Guidance
When separating nearby CR-V trim variants, review the completed alignment, align the centre first, and check lamp-cover clearance. While reviewing the supplied photographs, review the completed alignment, align the centre first, and check lamp-cover clearance.
When comparing 71507-TFC-H00 with the removed part, trial-fit without force, inspect damaged mounting points, and check adjacent panel gaps. Before final installation, avoid bending long sections, check lamp-cover clearance, and confirm the fitting direction.
For the listed 2015 application, avoid bending long sections, protect painted panel edges, and inspect the surrounding guides. During receiving inspection, trial-fit without force, confirm locator engagement, and confirm the fitting direction.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 71507-TFC-H00 |
| Cross-reference numbers | 71507-TFC-H00 71507TFCH00 |
| Internal item code | HD02005-068 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2015 |
| Installation area | Rear |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA CR-V 2015 |
Wholesale Supply and Packing
Before sourcing this bumper corner trim for CR-V, compare the supplied photographs, check the ordered mounting side, and state annual purchasing volume. At the workshop preparation stage, request export quotation terms, confirm the packing method, and state the destination port.
Before confirming this verify against the original part bumper corner trim, confirm the delivery schedule, send original-part photographs, and protect projecting locators. For a repeat wholesale order, confirm sample requirements, compare the supplied photographs, and confirm the packing method.
For HONDA CR-V 2015, confirm the surface requirement, state the target application, and confirm the packing method. While reviewing the supplied photographs, include the complete OE number, confirm sample requirements, and request export quotation terms.
A useful RFQ for HD02005-068 identifies 71507-TFC-H00, the rear installation area, the destination country and the planned order quantity. Include photos of the removed piece when fitment is still being reviewed.
Frequently Asked Questions
Does 71507-TFC-H00 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For CR-V, match the original clip spacing, inspect narrow moulding ends, review separate hardware needs, and review carton edge protection before installation or quotation.
Is a model name alone enough to order 71507-TFC-H00?
No. The CR-V name is useful for discovery, but OE number 71507-TFC-H00, VIN or build data, side, finish and physical attachment points should agree. For CR-V, verify the mounting side, compare the original edge profile, check adjacent panel gaps, and support the moulding length before installation or quotation.
What should be inspected when 71507-TFC-H00 arrives?
Check the bumper corner trim part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For CR-V, check the vehicle build date, review transferred hardware, confirm the final trim gap, and send original-part photographs before installation or quotation.
What information is needed for a 71507-TFC-H00 quotation?
Send HONDA CR-V 2015 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For CR-V, confirm the vehicle market, check the moulding curvature, inspect every screw point, and state the destination port before installation or quotation.
How should 71507-TFC-H00 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For CR-V, compare every attachment point, inspect the back-side structure, align the centre first, and compare the supplied photographs before installation or quotation.
Request a Quote
Send the complete OE reference 71507-TFC-H00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
